Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Features Description
lA maximum of six conferences may take place at one time; the maximum
number of conferees permitted at one time is 18; the maximum number of
conferees permitted in one conference is 5.
lAn Attendant console cannot be a member of a set-initiated conference.
lOnly one party may flash out of the conference at a time.
lAn extension with COS Option 203 (Broker’s Call) or 252 (Transfer Call With
Transfer) enabled cannot set up a conference. The switchook flash is inter-
preted as a SWAP...

Telephone Features
SUPERSET Telephone
To establish a conference:
0 Establish a 2-party call.
l Press the TRANSFER key.
l Transfer dial tone is returned (if programmed).
lDial the number of the next conferee.
0When the conferee answers, press the TRANSFER key - a conference is es-
tablished.
Any extension in the conference may add additional conferees to the confer-
ence by repeating the above steps.
Direct Trunk Select
Description4.16 This feature allows the user to directly access an outside trunk for...

Features DescriptionlLift the handset. PABX dial tone is heard.
lPress a Direct Trunk Select line key. Central Office dial tone is returned.
l Dial the external number.
To answer an incoming Direct Trunk Select call:
lLift the handset and press the Direct Trunk Select line key, when the set
rings and/or the line appearance flashes.
Disconnect AlarmDescription4.17 This feature provides an alarm indication when a 
SUPERSETtelephone is
unplugged.
ConditionsThe alarm is not cleared by the 
SUPERSE~telephone...

Telephone Features0
0
0
0
0
0
0
l
0
0When overriding Do Not Disturb, if the device becomes busy in the mean-
time, a busy override is attempted and the the overriding console or
SUPERSET4DN telephone attempts to enter the call; see OVERRIDE (IN-
TRUDE).A Hunt Group member that activates Do Not Disturb is treated as busy dur-
ing hunting.
While Do Not Disturb is active, 
Forwarding.works as if the extension were
busy.If the set user activates a callback, the callback is honored, even if Do Not
Disturb is...

Features Description
industry-standard Telephones and SUPfRSET3 Telephones
To activate Do Not Disturb:
lDial the Do Not Disturb access code followed by the digit 1.l Dial tone is heard.
0 Hang up.
To remove Do Not Disturb from the extension:
lDial the Do Not Disturb access code followed by the digit 2.
0 Dial tone is returned.
0 Hang up.
SUPERSET 3DN and SUPERSET 4DN Telephones
As above, or:
To activate Do Not 
Distuib:
lPress the DO NOT DISTURB feature key. The adjacent LCD indicator dark-
ens.To remove...

Telephone Features
party camps on, the waiting party is identified on the telephone display. If the
busy telephone has call forwarding programmed (it may be active or inac-
tive), then a 
softkey can be used to forward that waiting party to the call for-warding destination.
See FORWARDING for selecting a call forwarding destination.
See 
CAMPON and SWAP CAMPON also.
ConditionsThe following conditions apply to this feature:l
The softkey on the SUPERSET telephone is only displayed for the first 10
seconds...

Features Description
nal numbers. The type of forwarding selected determines under what condi-
tions the call is redirected. The types are:‘.
Forwarding - Busy (When Set’s Busy)This feature forwards all calls when the extension is busy. While the extension
is idle, calls may be made and received normally.
Forwarding 
- Busy/Don’t Answer (Busy/No Answer)
This feature forwards all calls received when the extension is busy or that are
not answered within a selected time-out period. While the extension is...

Telephone Features
NIGHT/DAY service at the time of forwarding (giving NIGHT/DAY based
forwarding). Priority Dial 0 can be used as well, with the feature being
checked for on the forwarding extension.
lForwarding does not apply if the calling extension is the party to which
the call would be forwarded.
lForwarding does not apply if the forwardee has COS Option 234 (Never a
Forwardee) in its COS.
0Forwarding directly to an LDN can only be set up by an Attendant. An ex-
tension can set up forwarding to an...

Features Description
lConnection checking is done between the calling party and the party be-
ing forwarded to; see DEVICE INTERCONNECTION CONTROL.
lIf forwarding is activated but for some reason the forwarding is not done,
the call continues as if forwarding was not active. If the call forward
-don’t answer timer expires and no forwarding is performed, the recall no
answer timer is started; see RECALL.
lFor display SUPERSETtelephones and the console, the forwarding party’s
identity are displayed...

Telephone Features
lAn extension is not forwarded to an external number unless it has COS Op-
tion 208 (Call Forwarding 
- External) in its COS.l
Campon to busy trunk groups after forwarding external is possible if the
caller is allowed to 
campon to trunk groups; see CAMPON.
lWhen the Attendant or a SUPERSE~4 or SUPERSET4DN telephone calls an
extension that is forwarded to an external number, the display shows the
external number and indicates the extension which forwarded the call. If
the Speed Call or...