Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Features Description
Set COS Option 253 (Call Forward -Don’t Answer Timer) for two to six rings.
OperationOperation varies depending upon the device type as described below.
industry-standard Telephones
To set up Forwarding (all internal types except I’m Here):
lLift the handset -wait for dial tone.
lDial the access code for the desired type of forwarding.
lDial the number to which calls are to be forwarded.
l Dial tone returns.
l Hang up-the extension is available for normal use.
To cancel Forwarding...

Telephone Features
l Dial any Call Forward access code.
l Replace the handset -External Forwarding is now inactive.
SUPERSET 3 Telephones
To select Forwarding (all types except I’m Here):
lFollow the same procedure as for industry-standard telephones. Remem-
ber it is also possible to go off-hook using the SPEAKER ON/OFF key.
SUPERSET3DN Teiephones
To set up Forwarding (all types except I’m Here):
lFollow the same procedure as for industry-standard telephones. Remem-
ber it is also possible to go...

Features Description
lPress the OFF softkey to deactivate forwarding; if deactivation is not de-
sired, press the EXIT 
softkey.
To Set Up or Modify Forwarding:
l With the handset on-hook, press the PROGRAM feature key.
l Press the CALL FWD feature key.
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO 
softkey; another type is displayed. Repeat
until the desired type is displayed. When the displayed type appears, press the
YES 
softkey.
If the...

Telephone FeatureslPress the Change softkey. Softkeys appear for the types of forwarding en-
abled in the set’s COS.
lSelect the desired forwarding type. The display requests the destination
number.
lEnter.the destination number. If an invalid number is entered, the display
shows INVALID NUMBER. Use the 
4-softkey to back space and erase the
entry. Enter the correct number (can be a speedcall key, if programmed) or
press the Current No. 
softkey to restore the previously programmed desti-
nation, (if...

Features Description
lPress the SPEAKER key; the system selects a line to dial on.
Headset Operation
DescriptionConditions
Programming
lSUPERSETtelephone compatible headsets must be supplied by the user.
0The handset must be out of its cradle for the headset to operate.
Enable COS Option 612 
(SUPERSET- Headset Operation) in the set’s COS.Operation
A call is ringing at the set:4.22 
SUPERSETtelephones can be equipped with headsets instead of hand-
sets. The set user answers incoming calls by pressing the...

Telephone Features
lWhen the hold is done, the SUPERSETtelephone user enters the select line
feature to choose another line; see LINE SELECTION.
l System music is heard if it is available and continues even if the held party
starts recalling to the 
SUPERSETtelephone. If music is not programmed,
silence is provided until the Hold Timeout period, when 
ringback is pro-
vided.
l All SUPERSETtelephones in a conference call can put the conference call
on hold.
lThe HOLD button is only available when talking...

Features Description
SUfERSETtelephone with COS Option 233 (Never A Consultee) enabled, or
if the held party is a trunk and the retrieving party is not an industry-
standard telephone or is an industry-standard telephone with COS Option
203 (Broker’s Call) disabled and COS Option 214 (Cannot Dial A Trunk After
Flashing) or COS Option 215 (Cannot Dial A Trunk While Holding Or in
Conference With One) is enabled and the retrieving extension has a trunk
in the call on consultation hold.
lWhen a two party...

Telephone Features
A call cannot be put on hold:
if an Attendant is in the call
when a party in the call is being rung back (Station Transfer Security)
if there is a party in the call with the Non-Busy Extension feature en-
abled
if there is a Call Announce Port in the call
if a party in the call has the call on Consultation 
Hold
if there is an Override in progress and the set is not the party being
overridden
if the set is a 
SUPfRSET4DN telephone using the Call Waiting feature
if there is a Direct...

Features Description
l Obtain dial tone.lDial the Call Hold Retrieve - Local access code.
lThe set is reconnected to the held call.
To retrieve the call remotely (from another extension):
l Obtain dial tone.
lDial the Call Hold Retrieve - Remote access code.
lDial the number of the extension holding the call.
lThe call is connected to the remote extension.
SUPERSET Telephones
To Place a Call on Hold:
lInform the caller, then press the red HOLD key. The call is held and the call-
er hears music, if...

Telephone Features
Every minute, the holiday messages alternate with the usual time and date
message that appear on the 
SUPERSETtelephone display.Conditions
The Christmas message is displayed from December 23 to December 27 and
the New Year’s message from January 1 to January 4.
ProgrammingEnable System Option 20 (Holiday Messages) to show holiday messages.Operation
The regular message and the holiday message alternate every minute.
IntercomDescription
4.25 Line Select keys on a SUPfRSET4 telephone that...