Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 157
Groups to Channels
The Group to Channel menu option allows you to assign and unassign 
channels to equipment group(s). For example, an equipment group can be 
dedicated to outbound call bridging so that bridging does not interfere with 
incoming calls.
Assign Groups to 
Channels
Use the following procedure to assign an equipment group to channels:1  
Start at the...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 158
2  
Enter the channel or range of channels that you want to assign to 
equipment groups in the 
Channels:
 field. Type a single channel number 
or a range of channel numbers, separated by commas or spaces, or all — 
this assigns all channels to the equipment groups specified in the 
Groups:
 field.
3  
Enter the equipment group or groups to which you want to assign...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 159
Unassign Groups to 
Channels
Use the following procedure to unassign an equipment group to channels:1  
Start at the Voice Equipment menu (Figure 89 on page 141
) and select:
The system displays the Unassign Channels From Groups window 
(Figure 96 on page 159
).
Figure 96. Unassign Channels From Groups Window  2  
Enter the channel or range of channels that you...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 160
3  
Enter the equipment group or groups to which you want to unassign the 
channels  in the 
Groups:
 field.  Type a single equipment group number, or 
a range of equipment group numbers separated by commas or spaces.  
Valid equipment group numbers are 0–30, with equipment group 31 used 
as a reserved group.  
4  
Press 
F3
 (Save).
The system unassigns the...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 161
Assign PBX 
Extension
Use the procedure below to assign a PBX extension telephone number to an 
ASAI channel: 1  
Start at the Voice Equipment menu (Figure 89 on page 141
) and select
The system displays the Assign PBX Extension to a Channel window 
(Figure 97 on page 161
). 
Figure 97. Assign PBX Extension to a Channel Window  2  
Enter the extension telephone...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 162
4  
Press 
F3
 (Save).
The system assigns the specified PBX extension telephone number to the 
selected channel.
Unassigning PBX 
Extensions from 
Channels
Use the procedure below to unassign PBX extensions from channels:1  
Start at the Voice Equipment menu (Figure 89 on page 141
) and select
The system displays the Unassign PBX Extension from a Channel 
window...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 163
SSP Functions
The SP/SSP Functions menu option allow you to assign functions to the SSP 
circuit cards, or to change the currently assigned functions of SSP circuit 
cards.
Assign SSP 
Functions
Use the following procedure to assign functions to SSP circuit cards:1  
Start at the Voice Equipment menu (Figure 89 on page 141
) and select:
The system displays the...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 164
Figure 99. Assign/Change Functions to SSP Cards Window!
CAUTION:
The SSP circuit card must be in the manoos state before functions may be 
asigned to it. Be careful when making assignments and reassignments. 
Assignments made in the Assign Functions to SP/SSP Cards window 
overwrite any other assignments cuirrently in effect on the specified circuit 
cards. See...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 165
3  
In the remaining fields, enable the function with Yes, or disable with No.  
The optional feature packages shown below may or may not appear in 
the Assign/Change Functions fo SP/SSP Cards window, depending on 
the software installed on your voice system. 
Several of these functions can be used in combination with another, 
depending on the type of circuit...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 166
Display SP/SSP 
Functions
Use the following procedure to view the current assignments for the SSP 
cards in your system:1  
Start at the Voice Equipment menu (Figure 89 on page 141
) and select:
The system displays the Display SP/SSP Functions window (Figure 100 on 
page 167
). Code + Play Yes
Code + Play + FlexWord Yes
Code + Play + WholeWord + Echo...