Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 147
7  
(Optional) In the 
Service:
 field, enter a service name, or press 
F2
 
(Choices) to select from a menu. This field is used to limit the voice 
equipment display to channels associated with a particular service or 
function. This field is valid only if the 
Equipment:
 field is channel. If you 
leave this field blank, the system does not restrict the display...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 148
Use the following procedure to change voice equipment options for analog 
and digital circuit cards:1  
Start at the Voice Equipment menu (Figure 89 on page 141
) and select:
The system displays the Change Options of Voice Equipment window 
(Figure 93 on page 148
). 
Figure 93. Change Options of Voice Equipment Window  2  
Enter talk or tdm in the 
Talk-tdm:...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 149
For E1/T1 circuit cards, the only valid option is tdm. No speech 
processing function is available. The SSP circuit card performs the 
speech processing function. For IVP4 and IVP6 Tip/Ring circuit cards, the 
option can be either talk or tdm.
Table 12 on page 149
 shows the valid equipment option settings.
Note:If a system application uses background speech (or...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 150
3  
Enter circuit card or channel in the 
Equipment:
 field, or press 
F2
 
(Choices) to select from a menu. If you specify a circuit card, the option is 
set for all channels of that circuit card.
4  
Enter a single number or range of numbers to select the voice circuit 
cards or channels to change in the 
Equipment Number:
 field, or all 
(default).
5  
Press...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 151
Note:E1 (CAS) channel 0 and 16 are used for framing and signaling, 
respectively. They will always display as manoos even when the 
circuit card is in service and cannot be changed to inserv.
Change an SSP circuit card to the manoos state only when there 
are no active calls on the system. The manoos state disrupts 
voice playback on all SSP circuit card channels...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 152
•
NETOOS (network out-of-service) — For digital circuit cards/channels 
only: Indicates the system is ready for the channel to go inserv, but is 
waiting for the network switch to also be ready for the channel to be 
inserv. Channels may freeze in this state if the switch is not ready for the 
channel to be inserv.
As indicated in the list, some maintenance states...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 153
Use the following procedure to change the maintenance state of a circuit card 
or channel:1  
Start at the Voice Equipment menu (Figure 89 on page 141
) and select:
The system displays the Change State of Voice Equipment window 
(Figure 94 on page 153
).
Figure 94. Change State of Voice Equipment Window  2  
Enter the state to which the designated equipment should...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 154
4  
Enter the equipment number or numbers for which you want to change 
the state in the 
Equipment Number:
 field.  Type a single number, a range 
of numbers, separated by commas or spaces, or all (default).
5  
(Optional) Enter Yes or No in the 
Change Immediately:
 field.  If you 
enter Yes, active calls on the specified equipment are disconnected 
abruptly. If...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 155
Line Side E1/T1 protocol, add or modify the following line in the 
/vs/data/mtc.rc file:
LST1_D_REMOVE_DELAY=
xxx
where 
xxx
 is the amount of delay in milliseconds. The default is 200.
Manoos E1/T1 Channels Using E&M Protocol The following suggestions apply only to individual manoos E1/T1 channels 
using the E&M protocol. Other E1/T1 protocols provide the ability...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 156
Ideally, the switch should use all inserv channels before attempting to use 
any manoos channels.  You can force the switch to use inserv channels 
before using manoos channels by requesting a switch hunting pattern that 
always scans for idle channels starting at the beginning of the hunt group.  
On a 4ESS switch, for example, this is achieved by requesting a...