Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide

3  
Voice System Administration  System Control
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 137
Figure 87.  Wait Time Window  2  
Enter a time interval between 60 and 600 seconds in the 
Second:
 field, or 
press 
F2
 (Choices). The default is 180.
Note:During this wait time, all calls in progress are completed, but no 
new calls are accepted. 
3  
Press 
F3
 (Save).
The system displays a message telling you it will stop the voice system if 
you press ENTER
....

3  
Voice System Administration  System Control
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 138
Shut Down the System
!
CAUTION:
Always stop the voice system before executing a shutdown.  Shutting down 
the system without stopping the voice system may negatively affect the 
software. 
Use the following procedure to shut down the system:1  
Start at the System Control menu (Figure 82 on page 126
) and select:
 
The system displays the Wait Time window (Figure 88...

3  
Voice System Administration  System Control
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 139
3  
Press 
F3
 (Save).
The system waits the amount of time indicated, then shuts the system 
down. The system then returns to the System Control menu (Figure 82 on 
page 126
).
Start the Voice System
This procedure allows you to start or restart the voice system.  When this 
process is invoked, all channels that were deactivated when you stopped the 
voice system...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 140
Note:Immediately after starting the voice system, you will be unable to 
perform some administrative commands and you may receive a 
system message indicating that MTC is busy.  After the system is 
initialized, MTC will be free to handle administrative commands. 
If you have started the system monitor (sysmon) prior to starting 
the voice system, sysmon must be...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 141
Figure 89. Voice Equipment Menu  Use the Voice Equipment menu to:•
Assign, display, and unassign voice system equipment options and states
•
Change channel maintenance states
•
Assign, display, and unassign channel and telephone number services
•
Assign, display, and unassign circuit card and channel functions
•
Print a report of voice system circuit card and...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 142
Display the Voice Equipment Window
Use the following procedure to access the Display Voice Equipment window:1  
Start at the Voice Equipment menu (Figure 89 on page 141
) and select:
The system displays the Display Equipment window (Figure 90 on page 
142
).
Figure 90. Display Voice Equipment Window  > Display Equipment 

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 143
This window, by default, displays all channels currently in the system, 
including:~
Channel circuit card and port (
CD.PT
)
~
Channel number (
CHN
)
~
Channel state (
STATE
)
~
Time of last state change (
STATE-CHNG-TIME
)
~
Associated service name (
SERVICE-NAME
)
~
Telephone number (
PHONE
)
~
Group number (
GROUP
)
~
Options (
OPTS
)
~
Circuit card type (
TYPE...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 144
Modify the Display 
Vo i c e  E q u i p m e n t  
Window Parameters
You can tailor the Display Voice Equipment window to show a full range of 
channels or a subrange.  The parameters you specify are saved in a file and 
remain in effect until you change them.
Use the following procedure to change the display parameters:1  
Start at the Display Voice Equipment...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 145
Figure 92. Modify Display Voice Equipment Window  3  
Enter card, channel (default), or group in the 
Equipment:
 field, or press 
F2
 (Choices) to select from a menu.
~
card — This parameter displays the version of software running on 
each circuit card (in the 
FUNCTION:
 field), circuit card options, and the 
circuit card O.S. Index (dip switch setting) for each...

3  
Voice System Administration  Voice Equipment
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 146
~
channel — Information displayed with the channel and card 
parameters is almost identical. However, the card parameter also 
displays the version of software running on each circuit card (in the FUNCTION:
 field), circuit card options, and the circuit card O.S. Index 
(dip switch setting).
~
group — In the standard display, with the 
GROUP
 column last, only the...