Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 87
4  
Press 
F3
 (Save).
The system stores the information to use the next time it processes a 
Display Host Sessions request.
Print a Host Sessions ReportUse the following procedure to print a report showing all host sessions 
currently defined:1  
Start at the Host Sessions: Actions Menu (Figure 57 on page 85
) and 
select: 
The system sends the Display Host...

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 88
Access the SDLC Protocol Menu
Use the SDLC Protocol menu to perform the following procedures:•
Add an SDLC Protocol
 on page 89
l
•
Change an SDLC Protocol
 on page 92
•
Deleting an SDLC Protocol
 on page 94
•
Diagnose the SDLC Connection
 on page 95
l
•
Display an SDLC Protocol
 on page 96
•
View SDLC Connection Information
 on page 97
•
Rename an SDLC Protocol...

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 89
Figure 59. SDLC Protocol Menu  
Add an SDLC 
Protocol
Use the following procedure to add an SDLC protocol:1  
Start at the SDLC Protocol menu (Figure 46 on page 67
) and select: 
The system displays the Add SDLC Protocol window (Figure 60 on page 
90
). 
> Add 

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 90
Figure 60. Add SDLC Protocol Window  
Table 5 on page 91
 describes the fields on this window.
2  
Enter the information described in Table 5 on page 91
.
3  
Press 
F3
 (Save).
The system adds the SDLC Protocol with the selected parameters. 

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 91
 
Table 5. Field Descriptions for SDLC Protocols
Field Name DescriptionConnection 
Name:
Identifies a logical connection to a host. The default value is SDLCn, where 
n 
is the circuit card number.
Card 
Number:
Indicates which communications adapter circuit card this connection uses.  
The default value is 1 unless circuit card number 1 is in use; then the...

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 92
Change an SDLC 
Protocol
Use the following procedure to change SDLC protocol:1  
Start at the SDLC Protocol menu (Figure 46 on page 67
) and select: 
The system displays the Change SDLC Protocol window (Figure 61 on 
page 93
).
Poll 
Address:
Specifies the polling address of the system.  The poll address is a 
hexadecimal value that ranges from 00 to FF.  The...

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 93
Figure 61. Change SDLC Protocol Window  2  
Enter the name of the connection you want to change in the 
Connection 
Name:
 field, or press 
F2
 (Choices) to select from a menu.
3  
Modify any of the fields as desired using Table 5 on page 91
 as a guide.
4  
Press 
F3
 (Save).
The system overwrites the host connection with new SDLC information. 

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 94
Deleting an SDLC 
Protocol
Use the following procedure to delete SDLC protocol:1  
Start at the SDLC Protocol menu (Figure 46 on page 67
) and select: 
The system displays the Delete SDLC Protocol window (Figure 62 on 
page 94
).
Figure 62. Delete SDLC Protocol Window  2  
Enter the name of the connection you want to delete in the 
Connection 
Name:
 field, or...

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 95
Diagnose the SDLC 
Connection
Use the following procedure to diagnose one SDLC connection or all SDLC 
connections:1  
Start at the SDLC Protocol menu (Figure 46 on page 67
) and select: 
The system displays the Diagnose SDLC Connection window 
(Figure 63
).
Figure 63. Diagnose SDLC Connection Window  2  
Enter the connection name or all in the 
Connection Name:...

3  
Voice System Administration  Host Configuration
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 96
Display an SDLC 
Protocol
Use the following procedure to display an SDLC protocol:1  
Start at the SDLC Protocol menu (Figure 46 on page 67
) and select: 
The system displays the Display SDLC Protocol window (Figure 64 on 
page 96
).
Figure 64. Display SDLC Protocol Window  2  
Enter the name of the connection in the 
Connection Name:
 field, or press 
F2...