Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phones 
67 Adding a DEFINITY IP Softphone 
3
Instructions for adding a telecommuter 
application
Assign this configuration to remote users who have two available phone lines. For 
example, to administer a telecommuter application for a home user at extension 
3010, complete the following steps:
1. Type 
add station 3010 and press RETURN. 
The Station screen appears. 
NOTE:
Use the add station command if this is a...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phones 
68 Adding a DEFINITY IP Softphone 
3
Related topics
Refer to the ‘‘
DEFINITY Internet Protocol (IP) Softphones’’ on page 1129 for 
descriptions of the DEFINITY IP Softphone configurations. 
Refer to the online help and to IP Softphone Overview and Troubleshooting for 
customer information on DEFINITY IP Softphone applications. This document is 
a Portable Document Format (PDF) document that is located in the...

Managing phone features 
69 Adding feature buttons 
4
DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
4
Managing phone features
This section provides generic instructions for adding any feature button. Because 
you may need more information to decide which feature buttons you want to 
assign to a user or group of users, we included the Telephone feature buttons
 table 
in this section. This table lists all of the feature buttons that are available on the 
DEFINITY ECS....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phone features 
70 Adding feature buttons 
4
Instructions
To assign feature buttons:
1. Type 
change station nnnn and press ENTER, where nnnn is the extension 
for the phone you want to modify.
The Station
 screen appears.
2. Press 
NEXT PAGE until you locate the Feature Button Assignment fields.
Some phones have several feature button groups. Make sure that you are 
changing the correct button. If you do not know...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phone features 
71 Telephone feature buttons 
4
Telephone feature buttons
The following table provides descriptions of the feature buttons that you can 
administer on multiappearance telephones. It also lists the administrable software 
names and recommended button label names. Display buttons support telephones 
equipped with alphanumeric displays. Note that some buttons may require 1-lamp 
or 2-lamp buttons. Some...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phone features 
72 Telephone feature buttons 
4
ac-alarm AC Alarm Administered Connection alarm 
notification: allows the user to monitor 
when the number of failures for an 
administered connection has met the 
specified threshold. 1 per 
station
aca-halt Auto-Ckt 
AssureAutomatic Circuit Assurance (display 
button): allows users of display telephones 
to identify trunk malfunctions. The system 
automatically...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phone features 
73 Telephone feature buttons 
4
alt-frl Alt FRL Alternate Facility Restriction Level 
(FRL): activates or deactivates an 
alternate facility restriction level for the 
extension.1 per 
system
ani-requst ANI 
RequestAutomatic Number Identification 
Request: allows the user to display the 
calling party’s number from incoming 
trunks during the voice state of call. The 
trunk must support this...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phone features 
74 Telephone feature buttons 
4
auto-cback Auto 
CallBack Automatic Call Back: when activated, 
allows inside user who placed a call to a 
busy or unanswered telephone to be called 
back automatically when the called 
telephone becomes available to receive a 
call.1 per 
station
auto-icom
(Group: __)Auto (name 
or ext #) Automatic Intercom: places a call to the 
station associated with the button....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phone features 
75 Telephone feature buttons 
4
brdg-appr
(Btn: __
Ext: ___)(extension) Bridged Call Appearance: provides an 
appearance of another user’s extension on 
this telephone. For example, an assistant 
might have a bridged appearance of their 
supervisor’s extension. The bridged 
appearance button functions exactly like 
the original call appearance, for instance it 
indicates when the appearance is active...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing phone features 
76 Telephone feature buttons 
4
busy-ind
(TAC/Ext: __)Busy Busy Indication: indicates the busy or idle 
status of an extension, trunk group, 
terminating extension group (TEG), hunt 
group, or loudspeaker paging zone. Users 
can press the busy-ind button to dial the 
specified extension.
You can assign this button to any lamp 
button and must specify which Trunk or 
extension the user wants to...