Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Upgrades And Additions Manual

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-57 Add IP Interface Assembly 
6
3. Check the Code column to see if the slots above the TN802B say DSMAPD 
or MEDPRO.
.
4. If MEDPRO, go to the entry just above the TN802B that says MEDPRO.
5. Type DSMAPD, and press 
En t e r. Changing the one entry automatically 
changes the entry above it. If it is in IP Trunk mode, you get the following 
error message:
MedPro type requires TN802...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-58 Add IP Interface Assembly 
6
3. Type iptrunk in the Password field and click OK. 
4. After logging on for the first time, change the administrator password and, if 
desired, the user name, to ensure security. See your Windows NT server 
documentation for details.
A-Law versus Mu-Law
For systems using A-Law companding, an additional procedure is necessary. 
On the SAT:
1. Busyout...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-59 Add IP Interface Assembly 
6
4. Type the new domain name in the Domain field and click OK > OK > 
Close.
5. When prompted to reboot the computer, select one of the following options:
nNo if you have not assigned IP addresses then go to ‘‘Assign an IP 
Address’’
nYe s if you have assigned IP addresses. 
Assign an IP Address
1. Click on My Computer > Control Panel > Network.
2....

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-60 Add IP Interface Assembly 
6
6. Select the DEC Ethernet adapter labeled [2].
7. Type a valid IP address for the IP Interface server in the IP Address: 
field.
8. Type the appropriate subnet mask in the Subnet Mask: field. 
NOTE:
Not all networks require steps 9 through 18. Check with the local 
network administrator to determine which are required.
9. If you use gateways, type the...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-61 Add IP Interface Assembly 
6
11. Type domain name in the Domain field.
12. If using DNS, click 
Add  under the DNS Service Search Order field and 
type its IP address.
13. Click on the WINS Address tab. 

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-62 Add IP Interface Assembly 
6
14. Make sure the [2] DEC shows in the Adapter field.
15. If WINS server is available, type its IP address in the Primary WINS 
Server field.
16. If DNS is available, select Enable DNS for Windows Resolution.
17. If the network uses an imported LMHOSTS file, select Enable LMHOSTS 
Lookup and Import LMHOSTS and click OK.
18. If the following dialog box...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-63 Add IP Interface Assembly 
6
If administered remotely through pcANYWHERE:
21. Click on the pcANYWHERE Restart Host Computer button on the toolbar 
to restart the computer.
If administered locally on a monitor, keyboard, and mouse:
21. Click Ye s in the dialog box to restart the computer. 
!WARNING:
When connected remotely via pcANYWHERE, only use the pcANYWHERE 
Restart Host...

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-64 Add IP Interface Assembly 
6
3. At the command prompt, type ping nnn.nnn.nnn.nnn (which is the IP 
address of your gateway). 
nIf everything is configured correctly, the system responds with the 
following message:
Reply from nnn.nnn.nnn.nnn: bytes=32 time Settings > Control Panel > 
Network. Select the Adapters tab and highlight the [2] DEC 
adapter.
nClick Properties > Change....

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-65 Add IP Interface Assembly 
6
3. At the command prompt, type ping 192.11.13.8 (which is the IP address of 
the internal processor). 
nIf you have connectivity, the system responds with the following 
message:
Reply from 192.11.13.8: bytes=32 time

DEFINITY ECS Release 8.2
Upgrades and Additions for R8.2si  555-233-122  Issue 1
April 2000
Adding or Removing Hardware 
6-66 Add IP Interface Assembly 
6
4. Plug the monitor into an AC power receptacle and turn it on.
5. If upgrading locally, reboot Windows NT by pressing the recessed reset 
button on the faceplate (see Figure 6-21
) of the TN802B IP Interface until 
the LCD shows a flashing MSHUT *. When the flashing stops and the 
asterisk disappears (about 2 min), it is safe to remove the circuit...