Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation For Adjuncts And Peripherals Manual

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
59 Connect Data Modules 
4
The current transmission speed appears: SPEED = 56KBPS? 
 (the 
d efault) or SPEED = 64KBPS? 
3. To keep the existing sp eed , p ress the ENTER/YES button.    
4. To c hange the existing  speed , p ress NEXT/NO
.  
When the SPEED ->
NewSpeed?
 prompt appears, press the ENTER/YES 
button.  
5. The CONTINUE?
 prompt appears. Press the...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
60 Connect Data Modules 
4
8. When SAVE CHANGES? 
app ears, press the ENTER/YES button again. 
CHANGES SAVED
 ap pears, and  the d ata mod ule returns to the HOME 
sc reen.
Setting other data options for the 7400C
You c an usually use the default setting s for all other op tions. However, two 
exc ep tions are d isc ussed below.  
Selecting data inversion for...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
61 Connect Data Modules 
4
Configuring the 7400D Data Module
The 7400D d ata mod ule is a c onverted  7400A used  for sync hronous data 
transmission (Fi g u re  1 6
). It is a direct replac ement for the MPDM. You configure 
the 7400D just as you would  a 7400A, exc ep t that  there is no SET INTERFACE 
op tion (the 7400D is an answer-only d evic e that c annot...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
62 Connect Data Modules 
4
Figure 16. 7400D Data Module 
Accessing the menus of the 7400D
You c onfig ure the 7400D from a set of menus.
1. To ac c ess the menus, p ress the NEXT/NO
 b utton.  
2. When the SET OPTIONS?
 p romp t ap p ears on the LCD. Press the NEXT/
NO
 b utton. 
00—0 0 0 ——
DATANEXT/NO BACK ENTER/YES
lÜ l m m
Push the b utton ind ic ated  b y the...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
63 Connect Data Modules 
4
3. The VIEW OPTIONS?
 prompt appears. Press the NEXT/NO
 b utton. 
Setting speed options for the 7400D
The d ata speed  d ep end s on the exac t ap p lic ation, b ut most req uire 9600 b p s or, 
less c ommonly, 19200. 
1. Press the NEXT/NO
 b utton to c ontinue with the setup  p roc ed ure.  
2. The SET OPTIONS?
 p rompt ap p ears on the...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
64 Connect Data Modules 
4
4. Press the NEXT/NO
 b utton until you see the yourSpeed=ON?
 p romp t.  
Then press the ENTER/YES
 b utton. 
5. If the CONTINUE? 
p romp t ap pears, p ress the ENTER/YES
 b utton.
Setting the automatic-answer feature on the 7400D
You c an set up  the 7400A d ata mod ule to automatic ally answer c alls or you c an 
have it ig nore c alls...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
65 Connect Data Modules 
4
1. When the SET CI LEAD?
 promp t ap p ears, p ress the ENTER/YES
 b utton. 
2. Press the NEXT/NO
 button until you see the
 CI = correctSetting?
 or CI -> 
correctSetting? 
p romp t. Then p ress the ENTER/YES
 b utton. 
3. When the CONTINUE?
 prompt appears, press the ENTER/YES
 b utton. 
4. When the SET CH LEAD?
 p romp t app ears,...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
66 Connect Data Modules 
4
7. When the SET CTS LEAD?
 prompt appears, press the ENTER/YES
 
b utton. 
8. Press the NEXT/NO
 b utton until you see the CTS =
 correctValue?
 or  
CTS ->
 correctValue? 
p rompt. Then p ress the ENTER/YES
 b utton. 
9. When the CONTINUE?
 prompt appears, press the ENTER/YES
 b utton. 
10. When the SET DCD LEAD?
 p romp t ap pears, p...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
67 Connect Data Modules 
4
13. When the SET DSR LEAD?
 p rompt ap p ears, p ress the ENTER/YES
 
b utton. 
14. Press the NEXT/NO
 b utton until you see the DSR = 
correctValue? 
or DSR 
-> 
correctValue?
 p romp t. Then p ress the ENTER/YES
 b utton. 
15. When the CONTINUE?
 prompt appears, press the ENTER/YES
 b utton. 
16. When the SET DTR DETECT?
 promp t ap p...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
68 Connect Data Modules 
4
19. When you see the SET DTR LEAD?
 p romp t, p ress the ENTER/YES
 
b utton. 
20. Press the NEXT/NO
 b utton until the DTR = 
correctValue?
 or DTR -
>
correctValue?
 prompt appears. Then  press the ENTER/YES
 b utton. 
21. When the CONTINUE?
 prompt appears, press the ENTER/YES
 b utton. 
22. When the SET LL LEAD?
 p rompt ap p ears, p...