Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation For Adjuncts And Peripherals Manual

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
39 Connect Data Modules 
4
Setting interface options on 7400A DCE
1. To ac c ess the menus, p ress the NEXT/NO
 b utton.  
2. When the SET OPTIONS?
 p romp t ap p ears on the LCD. Press the NEXT/
NO
 b utton. 
3. The VIEW OPTIONS?
 prompt appears. Press the NEXT/NO
 b utton. 
You will return to the op tions menus in a minute. But first you must selec t a 
c ommand...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
40 Connect Data Modules 
4
5. For each prompt, if you want to select the interface, press the ENTER/YES
 
b utton or, if you want a d ifferent interfac e, p ress the NEXT/NO
 b utton.  
a. Enab le the answer-only interfac e if the d ata mod ule must op erate 
without any kind  of external c ontrol:   
b . Enab le the AT-c ommand  interfac e if users need  to c...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
41 Connect Data Modules 
4
Setting speed options on 7400A DCE
1. Press the NEXT/NO
 b utton to c ontinue with the setup  p roc ed ure.  
2. The SET OPTIONS?
 p rompt ap p ears on the LCD. Press the ENTER/YES
 
b utton. 
A series of SET 
number SPEED?
 prompts appears.  
3. Press the NEXT/NO
 b utton until you see the SET 9600 SPEED?
 p romp t. 
Then press the...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
42 Connect Data Modules 
4
6. The SET 19200 SPEED?
 p romp t ap p ears. Press the NEXT/NO
 b utton. 
7. If you selec ted  the AT-c ommand  interfac e in the sec tion ‘‘Setting  interfac e 
op tions on 7400A DCE’’ (ab ove), you are finished  c onfiguring  the 7400A 
data module.  
Setting the automatic-answer feature on 7400A DCE 
You c an set up  the 7400A d ata...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
43 Connect Data Modules 
4
4. The CONTINUE?
 prompt appears. Press the ENTER/YES
 b utton.  
Setting the break-disconnect option on 7400A DCE 
This setting  sp ec ifies the leng th of the BREAK sig nal, a string  of 10 or more 
sp ac es that tells the host that the user need s to interrup t op erations. There are 
three options: TRIPLE, LONG (the d efault), and...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
44 Connect Data Modules 
4
2. If you pressed the ENTER/YES
 b utton at the SET LeadName LEAD?
 
prompt, 
the 
LeadName -> ON?
 p rompt ap p ears.  Press the ENTER/YES
 
b utton. 
3. Rep eat until all lead s have b een set. 
Setting parity on 7400A DCE
Next you need to id entify the type of p arity c od ing  that the d ata mod ule should  
exp ec t. Parity is an...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
45 Connect Data Modules 
4
Configuring the ring indicator on 7400A DCE
The ring -ind ic ator (p in 22) setting  c an have either of two values: CYCLE
 or ON
 
(the d efault). 
1. Ac c ep t the d efault values, unless otherwise instruc ted . When the SET RI 
LEAD?
 promp t ap p ears, p ress the NEXT/NO b utton to keep  the d efault, 
ON. 
Enabling remote loopback on...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
46 Connect Data Modules 
4
Enabling test mode on 7400A DCE
The test-mode (p in 25) setting  c an have either of two values: ON
 or OFF
 (the 
d efault).
1. Ac c ep t the d efault values, unless otherwise instruc ted . When the SET TM 
LEAD?
 promp t ap p ears, p ress the NEXT/NO
 b utton to keep  the d efault, 
ON
. 
Exiting menus and saving changes on 7400A DCE
1....

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
47 Connect Data Modules 
4
You return HOME. 
Checking DEFINITY administration  on 7400A DCE
Chec k that the DEFINITY is ad ministered to sup p ort the 7400A d ata mod ule in 
the DCE ap p lic ation as follows:
1. If nec essary, return to the HOME d isp lay on the 7400A b y p ressing  the 
NEXT/NO
 and  BACK buttons at the same time.
2. From the HOME d isp lay, p...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
48 Connect Data Modules 
4
2. When the SET OPTIONS?
 p romp t ap p ears on the LCD, p ress the ENTER/
YES
 button.    
A series of SET 
number SPEED?
 prompts appears.  
3. Press the NEXT/NO
 b utton until you see the SET 9600 SPEED?
 p romp t. 
Then press the ENTER/YES
 b utton.  
Most DEFINITY c onnec tions op erate at the 9600 sp eed .
4. The 9600 = OFF?
 prompt...