Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation For Adjuncts And Peripherals Manual

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
External Modems 
89 Administering the DEFINITY for Modems 
5
3. Set the Adjustable Make/Break Ratio:
 field  to &P0 
for the United  States 
and  Canada, &P1
 for the United  King d om and Hong  Kong. 
Controls the make/b reak ratios of p ulses and  DTMF d ialing . The United  
States and  Canad a use 39% make and  61% b reak. The United  King d om 
and  Hong  Kong  use 33% make and  67% b reak
4. Set the...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
External Modems 
90 Administering the DEFINITY for Modems 
5 

Printers 
91 Configuring the AT&T Model 572 
6
DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
6
Printers
This chapter p rovid es information on config uring  the various p rinters sup p orted  
by Lucent.
Configuring the AT&T Model 572
An AT&T Mod el 572 printer func tions as a CDR devic e, system p rinter, or journal 
p rinter. The op tions are set with func tion keys rather than DIP switc hes. Fig ure  21
 
shows the arrang ement of the func tion...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Printers 
92 Configuring the AT&T Model 572 
6
Entering Setup Mode
1. Load paper.
2. Turn the Power On
 b utton OFF.
3. Simultaneously p ress and  hold  the Print Quality
 and  On Line
 b uttons.
4. Without releasing  the Print Quality
 and On Line
 b uttons, press the Power 
On
 b utton. 
5. Release all three buttons. 
The p rinter is now in set-up  mod e. It p rints its c urrent setting s. 
Selecting the...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Printers 
93 Configuring the AT&T Model 572 
6
2. If the p rinter is used as the system printer, set the op tions as shown in 
Tab le 15
. 3 2 C H A R. SET ( GO ,  GL ) 0 2 U SA
33 CHAR.SET (G1, GR) 01 UK
34 CHAR SET (G2) 03 GE
35 CHAR SET (G3) 07 LINE 
DRAWING
81 OFF-LINE STATE 01 ALL RECEIVE
82 DSR 02 OFF
8 3 REQU EST TO  SEN D  ( RTS) TI M I N G 0 1 RTS
84 CD 02 OFF
8 5 C L EA R TO  SEN D  ( C TS) 0 2 O...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Printers 
94 Configuring the AT&T Model 572 
6
06 FONT 02 FONTCART
07 RESOLUTION 01 144
1 1 B U FFER 0 2 N - L I N E
13 PW ON MODE 01 ON-LINE
14 DIRECTION 01 B1-DIR.1
15 BUFF FULL 02 LF +  CR
1 6 P. E. 0 1 A C TI VE
17 A UTO  CA RRIA GE RETURN ( CR) 01 CR +  LF
18 ZERO 01 0
22 AUTO LINE FEED 01 CR ONLY
311’’ SKIP 01 OFF
3 2 C H A R. SET ( GO ,  GL ) 0 2 U SA
33 CHAR.SET (G1, GR) 01 UK
34 CHAR SET (G2) 03...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Printers 
95 Connecting the Printer 
6
Using the Control Panel
1. Use Line Feed
 or Form Feed
 to step  throug h the op tions for the func tion.
2. To ac tivate the menu for the func tion, p ress On Line
. 
3. To step  throug h the op tions for the func tion, p ress Line Feed
 and  Form 
Feed
.
4. When you reac h the op tion you are looking  for, p ress Print Quality
 to 
selec t. 
The p rinter p rints the...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Printers 
96 Okidata Model OP16N 
6
See Fig ure 22, ‘‘Connec ting  the OP16N p rinter to a Sun CMS using  the parallel 
interfac e’’, for an overview of p ossib le OP16N p arallel c onnec tions.
Figure 22. Connecting the OP16N printer to a Sun CMS using the parallel interface
Connecting the OP16N via serial port
The OP16N c omes with a p arallel interfac e only. T
o c onnec t it to a serial p ort, you...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Printers 
97 Okidata Model OP16N 
6
Figure 23. Connecting the OP16N printer to a Sun CMS using the serial converter
Figure 24. Connecting the OP16N printer to a Megaplex brick or IPC-1600 fanout 

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Printers 
98 Okidata Model OP16N 
6
Administering the OP16N
On Intel CMS systems, in face
, the Printer Type
 for the OP16n is HPLASERJET
. 
On Sun CMS systems, the lpadmin type
 for the OP16N is hplaserjet
.