Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation For Adjuncts And Peripherals Manual

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
49 Connect Data Modules 
4
6. The CONTINUE?
 prompt appears. Press the ENTER/YES
 b utton.  
7. The SET 19200 SPEED?
 p romp t ap p ears. Press the NEXT/NO
 b utton to 
keep  the d efault. 
8. The SET AT CONTROL?
 prompt appears. Press the ENTER/YES
 b utton 
to enab le Hayes-c omp atib le mod em c ommand s. Press the NEXT/NO
 
b utton to ac c ep t the d efault...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
50 Connect Data Modules 
4
10. If you enab led  AT c ommand s, the AT  — >  O N ?
 p romp t ap p ears. Press the 
ENTER/YES
 b utton. 
11. If you enabled  AT c ommand s, the CONTINUE?
 prompt appears. Press 
the ENTER/YES
 b utton. 
Configuring the RS-232 interface on 7400A DTE
You c an set eac h pin of the RS-232 c ab le to meet the need s of sp ec ific  
ap p lic...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
51 Connect Data Modules 
4
Table 11. DTE-mode RS-232 signal-rate lead settings for the 7400A
3. When the SET CI LEAD?
 prompt appears, press the NEXT/NO 
button to 
keep  the d efault (OFF) or the ENTER/YES
 button to make a c hang e. 
4. If you pressed  ENTER/YES 
in the prec ed ing  step  and  the CI LEAD = ON?
 
prompt appears, press the ENTER/YES
 b utton ag...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
52 Connect Data Modules 
4
6. If you pressed ENTER/YES 
in the p rec ed ing  step  and  the 
CI2 LEAD = ON?
 prompt appears press the ENTER/YES
 b utton ag ain to 
confirm your selection. 
7. When the SET CH LEAD?
 prompt appears, press the NEXT/NO
 b utton to 
keep  the d efault (OFF) or the ENTER/YES
 button to make a c hang e. 
8. If you pressed ENTER/YES 
in...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
53 Connect Data Modules 
4
10. The maintenanc e-op tion EIA lead s c onfig ure loop b ac k testing  for the d ata 
mod ule. You d o not need  to set any spec ific  op tions. So, when the SET LL 
LEAD?
 prompt appears, press the NEXT/NO
 and  BACK
 b uttons tog ether 
to return HOME. 
11. When the SAVE CHANGES?
 p romp t ap p ears, press the ENTER/YES 
 
b utton....

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
54 Connect Data Modules 
4
3. When the VIEW OPTIONS?
 p romp t ap p ears on the LCD, p ress the NEXT/
NO
 b utton. 
4. When the TEST - RESET?
 promp t ap p ears on the LCD, p ress the 
ENTER/YES
 b utton. 
5. When the DATA LOOPBACK?
 promp t ap p ears on the LCD, p ress the 
NEXT/NO
  b utton. 
6. When the SELF-TEST?
 p romp t ap p ears on the LCD, p ress the...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
55 Connect Data Modules 
4
8. When the LOCAL LOOP/ST?
 promp t ap p ears on the LCD, p ress the 
NEXT/NO
  b utton. 
9. When the REMOTE LOOPBACK?
 promp t app ears on the LCD, p ress the 
NEXT/NO
  b utton. 
10. When the RESET OPTIONS?
 p romp t ap p ears on the LCD, p ress the 
ENTER/YES
  b utton. 
The fac tory op tions are restored , and  you return to the HOME...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
56 Connect Data Modules 
4
have no c ontrol buttons). While a full exp lanation of the Hayes c ommand  set is 
b eyond  the sc op e of this b ook, the following  sec tions sketc h the b asic  p roc esses 
involved  in c hang ing  the fac tory setting s.  
Installing required configuration equipment for the 7400B
Before you c an enter AT c onfig uration c ommand s,...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
57 Connect Data Modules 
4
n&C1
 sets the Data Carrier Detec t (DCD) c irc uit of the d ata mod ule 
to op erate ac c ord ing  to the EIA standard
n&D2
 sets the d ata mod ule to g o on hook when an on-to-off 
transition is d etec ted on the Data Terminal Read y (DTR) inp ut, 
d isc onnec ting  the c all
nQ1
 turns off the result c od es that would  b e the normal...

DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
Data Modules and Asynchronous Data Units 
58 Connect Data Modules 
4
Figure 15. 7400C Data Module (High Speed Link)
Setting the data speed for the 7400C
Proc eed  as follows.
1. From the HOME sc reen, p ress the NEXT/NO
 b utton until SET DATA 
OPTS?
 ap p ears. Then p ress the ENTER/YES button.  
2. When SET SPEED?
 ap p ears, p ress the ENTER/YES button. 
SET DATA OPTS?
DATANEXT/NO BACK ENTER/YES
l   m m...