Lexmark X 950 User Manual

3Close cover F.
4If necessary, touch Continue from the printer control panel.
455 staple jam
1Open door G.
2Press the latch to open the stapler door.
Note: The stapler door is located behind the finisher.
Clearing jams281 

3Lower the latch of the staple cartridge holder, and then pull the staple cartridge holder out of the printer.
4Use the metal tab to lift the staple guard, and then remove any jammed or loose staples.
5Close the staple guard.
6Press down on the staple guard until it clicks into place. Clearing jams282 

7Push the staple cartridge holder firmly back into the stapler unit until the staple cartridge holder clicks into
place.
8Close the stapler door.
9Close door G.
10If necessary, touch Continue, jam cleared from the printer control panel.
28y.xx paper jams
The scanner failed to feed one or more pages through the ADF.
1Remove all original documents from the ADF.
Note: The message clears when the pages are removed from the ADF.
2Open the ADF cover.
3Firmly grasp the jammed paper on each side, and then gently...

Troubleshooting
Understanding the printer messages
Adjusting color
Wait for the process to complete.
Bin 2 is unable to lower, remove paper and check for an obstruction
Try one or more of the following:
Remove paper and clear any obstruction from the bin.
To u c h  Continue to clear the message and continue printing.
Change [paper source] to [custom type name]
Try one or more of the following:
To u c h  Use current [paper source] to ignore the message and print from the selected tray.
Load the correct...

Change [paper source] to [custom string] load [orientation]
Try one or more of the following:
To u c h  Use current [paper source] to ignore the message and print from the selected tray.
Load the correct paper size and type in the tray, verify the paper size and type settings are specified
in the printer control panel Paper menu, and then touch Paper changed, continue.
To u c h  Cancel job to cancel the print job.
Change [paper source] to [paper size]
Try one or more of the following:
To u c h  Use...

Check [src] orientation or guides
Try one or more of the following:
Move the paper guides in the tray to the correct positions for the paper size loaded.
Make sure the paper size setting matches the paper loaded in the tray:
1From the printer control panel Paper menu, check the Paper Size setting.
2Before sending the print job, specify the correct size setting:
–For Windows users, specify the paper size from Print Properties.
–For Macintosh users, specify the paper size from the Page Setup dialog.
Close...

Fax partition inoperative. Contact system administrator.
The fax partition appears to be corrupted. Try one or more of the following:
To u c h  Continue to clear the message.
Turn the printer off and then back on to reset the printer. If the message appears again, then contact
your system support person.
Fax server 'To Format' not set up. Contact system administrator.
The printer is in Fax Server mode, but the Fax Server setup has not been completed.
Try one or more of the following:
To u c h...

3Install the specified tray.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
Cancel the print job.
Load [src] with [custom type name]
Try one or more of the following:
Load the specified paper in the tray or feeder.
To u c h  Paper loaded, continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer
cannot find a tray with the correct paper type and size, it...

Load Manual Feeder with [custom type name]
Try one or more of the following:
Load the specified paper in the manual feeder.
To u c h  Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and
continue printing.
To u c h  Automatically select paper to use the paper loaded in the tray.
Cancel the print job.
Load Manual Feeder with [custom string]
Try one or more of the following:
Load the specified paper in the manual feeder.
To u c h  Prompt each page, paper loaded or Do not...

Manual feeder expects [paper size]. Check [paper source] guides
Try one or more of the following:
Load the specified paper size in the manual feeder.
Physically adjust [paper source] guides to a recognized paper size.
To u c h  Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the
printer cannot find a tray with the correct paper type and size, then it prints from the default source.
Memory full, cannot...