Home > Lexmark > Printer > Lexmark X 950 User Manual

Lexmark X 950 User Manual

Here you can view all the pages of manual Lexmark X 950 User Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 261

If you do not know the IP address of the printer, you can:
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2Click Settings.
3Under Other Settings, click E‑mail Alert Setup.
4Select the items for 
notification, and type the e‑mail addresses.
5Click Submit.
Note: For information on setting up the e‑mail server, contact your system support person....

Page 262

Clearing jams
Carefully select paper and specialty media and load it properly to avoid most jams. If jams do occur, follow the
steps outlined in this section.
Note: Jam Recovery is set to Auto by default. The printer reprints jammed pages unless the memory
required to hold the pages is needed for other printer tasks.
Avoiding jams
Paper tray recommendations
Make sure the paper lies flat in the tray.
Do not remove a tray while the printer is printing.
Do not load a tray while the printer is printing. Load...

Page 263

9
10
87
1
2
12
4
13
14
3
5
6
11
Area Area name Jam numbers What to do
1Cover F (paper
transport)4yy.xx
455Open cover F, and then remove jammed paper.
Open door G and H, and then remove the jammed paper.
Open staple door, remove the staple cartridge, and then remove the
jammed staple. 2Standard finisher bin
3Door G
4Door H
5Finisher bin 1
6Finisher bin 2
7Door C
Tr a y s  1 – 424xOpen door C, and then remove the jammed paper
Open each tray, and then remove the jammed paper.
8Multipurpose feeder250Remove...

Page 264

Area Area name Jam numbers What to do
12Door B230Open door B, and then remove jammed paper.
13Door A201–202
231
281Open door A, and then remove the jammed paper.
Remove all jammed paper in the fuser.
14Door D203Open door A, and then door D, and then remove the jammed paper.
201–202 paper jams
If the jammed paper is visible in the standard exit bin, then 
firmly grasp the paper on each side, and then gently
pull it out.
Note: Make sure all paper fragments are removed.
Paper jam in the fuser
1Open door A by...

Page 265

3Firmly grasp the jammed paper on each side, and then gently pull it out.
Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser.
Note: Make sure all paper fragments are removed.
4Push the green lever back into place.
5Close door A.
6If necessary, touch Continue from the printer control panel.
Paper jam under the fuser
1Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface...

Page 266

1Open door A, and then door D by lifting the release latch of each door and lowering the doors.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching.
2Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3Close door D, and then close door A.
4If necessary, touch Continue from the printer control panel.
230 paper jam
1Lower the...

Page 267

2Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3Close door B.
4If necessary, touch Continue from the printer control panel.
231 paper jam
1Open door A by lifting the release latch, and then lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
1
2
Clearing jams267 

Page 268

2Lift the green lever.
3Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4Push the green lever back into place.
5Close door A.
6If necessary, touch Continue from the printer control panel.
24x paper jam
Note: Make sure all paper fragments are removed when pulling out any jammed paper. Clearing jams268 

Page 269

Paper jam in Tray 1
1Open Tray 1.
2Firmly grasp the jammed paper on each side, and then gently pull it out.
3Close Tray 1.
4If necessary, touch Continue, jam cleared from the printer control panel. Clearing jams269 

Page 270

Paper jam in one of the optional trays (Trays 2–4)
1Check door C, and then 
firmly grasp the jammed paper and then pull it out.
2Open the specified tray.
3Firmly grasp the jammed paper on each side, and then gently pull it out.
4Close the tray.
5If necessary, touch Continue, jam cleared from the printer control panel. Clearing jams270 
Start reading Lexmark X 950 User Manual

Related Manuals for Lexmark X 950 User Manual

All Lexmark manuals