Lexmark X 950 User Manual

4Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the
cartridge.
1
2
1
5Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the
cartridge.
1
2
Maintaining the printer251 

6Push the staple cartridge into the finisher until it clicks into place.
7Close door G.
Replacing staple cartridge in the booklet stapler unit
Note: This task is applicable only when a booklet finisher is installed.
1Open door G.
Maintaining the printer252 

2Press the handles of the staple cartridge to the right, and then take the staple cartridge unit out of the
finisher.
1
2
Maintaining the printer253 

3Hold the tabs on both sides of the staple cartridge.
Maintaining the printer254 

4Rotate the booklet staple cartridge at an angle.
Maintaining the printer255 

5Lift the booklet staple cartridge out of the unit.
6Squeeze both sides of the empty staple case with your 
fingers, and then remove the staple case from the
cartridge.
1
2
1
Maintaining the printer256 

7Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the
cartridge.
1
2
8Return the cartridge to its original position, and then gently push the cartridge in until it clicks into place.
Maintaining the printer257 

9Return the unit to its original position.
10Close door G.
Moving the printer
Before moving the printer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or
more trained personnel to lift it safely.
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal
injury or printer damage:
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
Disconnect all cords and cables from the printer...

Shipping the printer
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit. Maintaining the printer259 

Administrative support
Finding advanced networking and administrator
information
This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced
system support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded
Web Server — Security: Administrator's Guide on the Lexmark support Web site at
http://support.lexmark.com.
Checking the status of the printer
1Type the printer IP address into the address field of your Web browser.
If...