Lexmark X 950 User Manual

Paper jam in Tray 5 (high‑capacity feeder)
Paper jam inside the tray
1
Pull out the tray until it stops.
Warning—Potential Damage: Do not pull out the tray with too much force. Doing so may hit and injure
your knees.
2Firmly grasp the jammed paper on each side, and then gently pull it out.
3Push the tray gently until it stops.
4If necessary, touch Continue, jam cleared from the printer control panel. Clearing jams271 

Paper jam in the tray exit
1
Gently move the tray to the left until it stops.
2Firmly grasp the jammed paper on each side, and then gently pull it out.
3Gently put the tray back into position.
4If necessary, touch Continue, jam cleared from the printer control panel.
Paper jam in the top cover
1
Gently move the tray to the left until it stops.
Clearing jams272 

2Open the top cover.
12
2
3Firmly grasp the jammed paper on each side, and then gently pull it out.
Clearing jams273 

4Close the top cover.
5Gently put the tray back into position.
6If necessary, touch Continue, jam cleared from the printer control panel.
250 paper jam
1Remove any jammed pages from the multipurpose feeder.
2Load paper into the multipurpose feeder.
3If necessary, touch Continue, jam cleared from the printer control panel. Clearing jams274 

281 paper jam
Paper jam in door A
1Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching.
2Determine where the jam is located, and then remove it:
aIf the paper is visible under the fuser, firmly grasp it on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
bIf the paper is not visible, then you will need to remove the fuser unit.
Warning—Potential Damage:...

4Align the fuser unit using the handles on each side, and then place it back into the printer.
1
22
3Close door A.
4If necessary, touch Continue from the printer control panel.
Paper jam in cover F (paper transport)
1Open cover F.
2Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
Note: If the paper jam on the right is 
difficult to remove, then rotate the knob counterclockwise. Clearing jams276 

3Close cover F.
4If necessary, touch Continue from the printer control panel.
4yy.xx paper jams
If the jammed paper is visible in any of the 
finisher exit bins, then 
firmly grasp the paper on each side, and then
gently pull it out.
1Standard finisher bin
2Finisher bin 1
3Finisher bin 2
Note: Finisher bin 2 is available only when a booklet finisher is installed.
Note: Make sure all paper fragments are removed.
Paper jam in door H
1Open door H.
Note: Door H is located between the finisher exit bins.
2Firmly...

Note: Make sure all paper fragments are removed.
3Close door H.
4If necessary, touch Continue from the printer control panel.
Paper jam in door G
1Open door G.
1
2
3
4
5
6
7
Clearing jams278 

Area Cover, knob, or handle name
1Cover G1
2Cover G2
3Knob G3
4Cover G4
5Cover G7
6Knob G8
7Handle G9
2Lift cover G1 lever.
3Firmly grasp any jammed paper, and then gently pull it out.
Note: Make sure to remove all paper fragments after gently pulling out any jammed paper inside door G.
4Move cover G2 to the right, and then remove any jammed paper.
Note: If the paper is jammed in the rollers, then rotate knob G3 counterclockwise.
5Move cover G4 down, and then remove any jammed paper.
6Move cover G7 to...

8Lift the inside cover. If the paper is jammed in the rollers, then rotate knob G8 counterclockwise, and then
remove the jammed paper.
9Close door G.
10If necessary, touch Continue from the printer control panel.
Paper jam in cover F (paper transport)
1Open cover F.
2Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
Note: If the paper jam on the right is 
difficult to remove, then rotate the knob counterclockwise. Clearing jams280