Lexmark X 950 User Manual

Scanner ADF Cover Open
The ADF cover is open. The message clears when the cover is closed.
Scan Document Too Long
The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message.
SMTP server not set up. Contact system administrator.
An error occurred on the SMTP server, or the SMTP server is not configured properly. Touch Continue to
clear the message. If the message appears again, contact your system support person.
Some held jobs were not restored
To u c h  Continue to delete the...

Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make
sure the paper is large enough for the data being printed.
Cancel the print job.
34 Incorrect paper type, check [paper source]
Try one or more of the following:
Load the appropriate paper or specialty media in the proper tray.
Confirm that the wheel on Tray 1 is set to the paper type loaded in the tray. Make sure the paper type
matches the document you are trying to print.
To u c h  Continue to clear...

37 Insufficient memory, some Held Jobs were deleted
The printer deleted some held jobs in order to process current jobs.
To u c h  Continue to clear the message.
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
To u c h  Continue to clear the message.
38 Memory full
Try one or more of the following:
To u c h  Cancel job to clear the message.
Install additional printer memory.
39 Complex...

53 Unformatted flash detected
Try one or more of the following:
To u c h  Continue to stop the defragment operation and continue printing.
Format the flash memory. If the error message remains, the flash memory may be defective and require
replacing.
54 Network [x] software error
Try one or more of the following:
To u c h  Continue to continue printing.
Turn the printer off, wait for about 10 seconds, and then turn the printer back on.
Upgrade (flash) the network firmware in the printer.
54 Serial option [x]...

56 Parallel port [x] disabled
Try one or more of the following:
To u c h  Continue to clear the message.
The printer discards any data received through the parallel port.
Make sure the Parallel 
Buffer menu item is not set to Disabled.
56 Serial port [x] disabled
Try one or more of the following:
To u c h  Continue to clear the message.
The printer discards any data received through the serial port.
Make sure the Serial 
Buffer menu is not set to Disabled.
56 Standard USB port disabled
Try one or more of...

58 Too many flash options installed
1Turn the printer 
off.
2Unplug the power cord from the wall outlet.
3Remove the excess 
flash memory.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Too many trays attached
1Turn the printer 
off.
2Unplug the power cord from the wall outlet.
3Remove the additional trays.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
59 Incompatible tray [x]
Try one or more of the following:
Remove the specified...

80.xx Fuser life warning
Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following
the instruction sheet that came with the replacement part.
To u c h  Continue to clear the message and continue printing.
80 Replace fuser
1Replace the fuser using the instruction sheet that came with the replacement part.
2To u c h  Continue to clear the message and continue printing.
80 Scanner maintenance required, use ADF kit
Contact customer support, and report the message....

82.xx Waste toner bottle nearly full
Order a replacement waste toner bottle immediately.
1Replace the waste toner bottle.
For instructions on installing the waste toner bottle, from the printer control panel touch More
Information.
2To u c h  Continue to clear the message and continue printing.
84 unsupported [color] photoconductor
Remove the specified photoconductor, and then install a supported one.
84.xx [color] photoconductor missing
Install the specified color photoconductor, following the instruction...

88.2x Replace [color] cartridge
The specified toner cartridge is empty.
1Replace the specified toner cartridge.
2To u c h  Continue to clear the message and continue printing.
88.xx [color] cartridge low
1Order a replacement toner cartridge immediately.
2To u c h  Continue to clear the message and continue printing.
Note: Continue printing until the 88.xx [color] cartridge very low message appears.
88.xx [color] cartridge very low
The specified print cartridge is very low. If you do not have a replacement...

To u c h  Finish job without further scanning to end the scan job at the last successfully scanned page.
Note: This does not cancel the scan job. All successfully scanned pages will be processed further
for copying, faxing, or e‑mailing.
To u c h  Restart job to clear the message and start a new scan job with the same settings as the previous
job.
840.01 Scanner disabled by admin
Print without the scanner or contact your system support person.
840.02 Scanner disabled. Contact system administrator if...