Lexmark W850dn User Manual

Try one or more of the following:
Move the guides in the tray to the correct positions for the paper size loaded.
Note: To learn how to adjust the paper guides, press the up or down arrow button until Show Me appears, and
then press 
.
Make sure the paper size setting matches the paper loaded in the tray:
1From the printer control panel Paper menu, check the Paper Size setting.
2Before sending the job to print, specify the correct size setting:
–For Windows users, specify the size from Print Properties....

Insert the hole punch box
Insert the hole punch box into the finisher. Wait for the message to clear.
Note: To learn how to insert the hole punch box, press the up or down arrow button until 
Show Me appears, and
then press 
.
Load  with 
Try one or more of the following:
Load the specified paper into the specified source to clear the message and continue printing.
Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .
Load  with 
Try one or more of the...

Load Manual Feeder with 
Try one or more of the following:
Load the multipurpose feeder with the correct paper type and size.
Ignore the request and print on paper that is already being used in one of the trays. Press the up or down arrow
button until 
Automatically select paper appears, and then press .
If the printer finds a tray that has paper of the correct type, it uses the paper from that tray. If the printer cannot
find a tray with the correct paper type, it prints on the paper that is installed...

Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Remove paper from bin 
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then press the up or down arrow button until 
Continue appears,
and then press 
.
Remove paper from all bins
Output bins have reached their capacity. Remove paper from all output bins to clear the message and continue printing.
Remove...

32 Cartridge part number unsupported by device
Remove the print cartridge, and then install a supported one.
34 Short paper
Try one or more of the following:
Load the appropriate paper in the tray.
Press the up or down arrow button until Continue appears, and then press  to clear the message and print
the job using a different paper tray.
Check tray length and width guides and make sure the paper is properly loaded in the tray.
For Windows users, check the Print Properties settings to make sure the print...

37 Insufficient memory to collate job
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press  to print the portion of the job
already stored and begin collating the rest of the print job.
Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then...

39 Complex page, some data may not have printed
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press  to clear the message and
continue printing.
Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
Install additional printer memory.
50 PPDS font error
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press  to clear the message and
continue...

53 Unformatted flash detected
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press  to stop the defragment
operation and continue printing.
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Serial option  error
 is the number of the serial option.
Try one or more of the following:
Check that the serial cable is connected correctly and is the proper one for the serial port.
Check that the...

56 Parallel port  disabled
 is the number of the parallel port.
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press  to clear the message.
The printer discards any data received through the parallel port.
Make sure the Parallel Buffer menu item is not set to Disabled.
56 Serial port  disabled
 is the number of the serial port.
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press  to clear the...

57 Configuration change, some held jobs were not restored
Since the time the jobs were stored on the printer hard disk, something changed in the printer to invalidate the held
jobs. Possible changes include:
The printer firmware was updated.
Paper input, output, or duplex options needed for the print job were removed.
The print job was created using data from a device in the USB port, and the device is no longer in the port.
The printer hard disk contains jobs that were stored while installed in a...