Lexmark W850dn User Manual

62 Disk full
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press  to clear the message and
continue processing.
Delete fonts, macros, and other data stored on the printer hard disk.
Install a larger printer hard disk.
63 Unformatted disk
Try one or more of the following:
Press the up or down arrow button until Format Disk appears, and then press  to clear the message and
continue printing.
Format the disk.
If the error message remains, the hard disk...

88.yy Replace cartridge
The toner cartridge is exhausted.
1Replace the toner cartridge.
2Press the up or down arrow button until Continue appears, and then press  to clear the message.
88 Replace cartridge to continue
Replace the toner cartridge.
1565 Emulation error, load emulation option
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.
To fix this, download the correct download emulator version from the Lexmark Web site at...

Flex, fan, and straighten paper before loading it.
Do not use paper that has been cut or trimmed by hand.
Do not mix paper sizes, weights, or types in the same stack.
Make sure all sizes and types are set correctly in the printer control panel menus.
Store paper per the manufacturers recommendations.
Understanding jam numbers and locations
When a jam occurs, a message indicating the jam location appears on the display. Open doors and covers and remove
trays to access jam locations. To resolve any paper...

Jam numbersWhat to do
200–202Open Door A, and then remove the jam.
203Open Doors A and E, and then remove any jams.
230Lower the duplex unit (Door D), and then remove the jam. Open Doors A and E, and then remove any jams.
231Lower the duplex unit (Door D), and then remove the jam. Open Door A, and then remove the jam.
24xOpen each tray, and then remove any jams.
250
1Remove all media from the multipurpose feeder.
2Flex and stack the media.
3Reload the multipurpose feeder.
4Adjust the paper guide....

2Pull the jam up and toward you.
Note: If the jam does not move immediately, stop pulling. Push down and pull the green lever to make it easier
to remove the jam. Make sure all paper fragments are removed.
3Close Door A.
202 paper jam
1Open Door A by pushing the release latch up and lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching. Troubleshooting155
Downloaded From...

2Pull the jam up and toward you.
Note: If the jam does not move immediately, stop pulling. Push down and pull the green lever to make it easier
to remove the jam. Make sure all paper fragments are removed.
3Close Door A.
203, 230–231 paper jams
203 paper jam
1
Open Door A by pushing the release latch up and lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching. Troubleshooting156...

2Open Door E by pushing the release latch and lowering the door.
3Pull the jam up.
4Close Door E.
5Close Door A. Troubleshooting157
Downloaded From ManualsPrinter.com Manuals 

230 paper jam
1
Open Door D.
2Remove the jam.
3Close Door D. Troubleshooting158
Downloaded From ManualsPrinter.com Manuals 

4Open Door A by pushing the release latch up and lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
5Open Door E by pushing the release latch and lowering the door.
Troubleshooting159
Downloaded From ManualsPrinter.com Manuals 

6Pull the jam up.
7Close Door E.
8Close Door A.
231 paper jam
1
Open Door D.
Troubleshooting160
Downloaded From ManualsPrinter.com Manuals