Lexmark W850dn User Manual

2Remove the jam.
3Close Door D.
4Open Door A by pushing the release latch up and lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching. Troubleshooting161
Downloaded From ManualsPrinter.com Manuals 

5Pull the jam up and toward you.
Note: If the jam does not move immediately, stop pulling. Push down and pull the green lever to make it easier
to remove the jam. Make sure all paper fragments are removed.
6Close Door A.
24x paper jam
Jam in Tray 1
1
Remove Tray 1 from the printer.
Troubleshooting162
Downloaded From ManualsPrinter.com Manuals 

2Remove the jam.
3Insert Tray 1.
Jam in the optional tray
1
Pull the tray out.
Troubleshooting163
Downloaded From ManualsPrinter.com Manuals 

2Remove the jam.
3Insert the tray.
Clearing jam in Door A
1
Open Door A by pushing the release latch up and lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching. Troubleshooting164
Downloaded From ManualsPrinter.com Manuals 

2Pull the jam up and toward you.
Note: If the jam does not move immediately, stop pulling. Push down and pull the green lever to make it easier
to remove the jam. Make sure all paper fragments are removed.
3Close Door A.
Clearing jam in Door B
1
Open Door B.
Troubleshooting165
Downloaded From ManualsPrinter.com Manuals 

2Pull the jam up and toward you.
3Close Door B.
241 paper jam
1
Open Door C.
Troubleshooting166
Downloaded From ManualsPrinter.com Manuals 

2Pull the jam up and toward you.
Note: Make sure all paper fragments are removed.
3Close Door C.
4Open Tray 1, and then remove any crumpled paper from the tray.
5Insert Tray 1. Troubleshooting167
Downloaded From ManualsPrinter.com Manuals 

250 paper jam
1Remove the paper from the multipurpose feeder.
2Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
3Load the paper into the multipurpose feeder.
4Adjust the paper guide to rest lightly against the edge of the paper.
280–282 paper jams
280‑281 paper jams
1
Open Door A by pushing the release latch up and lowering the door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce...

2Pull the jam up and toward you.
Note: If the jam does not move immediately, stop pulling. Push down and pull the green lever to make it easier
to remove the jam. Make sure all paper fragments are removed.
3Close Door A.
4Open Door F.
5Remove the jam.
6Close Door F. Troubleshooting169
Downloaded From ManualsPrinter.com Manuals 

282 paper jam
1
Open Door F.
2Remove the jam.
3Close Door F.
283, 289 staple jams
283 paper jam
1
Lift Door H.
Troubleshooting170
Downloaded From ManualsPrinter.com Manuals