Kyocera TASKalfa 250ci User Manual

Default Setting (System Menu) 
OPERATION GUIDE8-97
8
HTTP Security Setup
Select the HTTP security level. This setup is available when SSL is On . The default setting is  HTTPS Only.
NOTE: HTTP must be set to [On] in  Protocol Detail on page 8-92.
Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of  Network, [Next] of  Secure 
Protocol , and then [Change] of HTTPS Security .
3Press [HTTP or HTTPS Only] or [HTTPS Only].
4Press [OK].
5After changing the setting, restart the...

Default Setting (System Menu) 
8-98OPERATION GUIDE
5After changing the setting, restart the system or 
turn the machine OFF and then ON again. 
For detailed information on restarting the system, 
refer to Restarting the System on page 8-88 .
IPSec Setting
Sets up IPSec. The default setting is  Off. Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of  Network Security, and 
then [Change] of  IPSec.
NOTE: If user login administration is disabled, the 
user authentication...

Default Setting (System Menu) 
OPERATION GUIDE8-99
8
4Press [OK].
5After changing the setting, restart the system or 
turn the machine OFF and then ON again. 
For detailed information on restarting the system, 
refer to Restarting the System on page 8-88 .
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
8-100OPERATION GUIDE
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or 
optional interfaces. 
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The...

Default Setting (System Menu) 
OPERATION GUIDE8-101
8
1Press the System Menu  key.
2Press [System], [Next] of  Interface Block Setting 
and then [Change] of  Optional Interface 1 or 
Optional Interface 2 .
3Press [Block].
4Press [OK].
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
8-102OPERATION GUIDE
Security Level (Security Level setting)
The Security Level setting is primarily a menu option used by service personnel for maintenance work. There is 
no need for customers to use this menu.
Document Guard Setting
When the optional Printed Document Gu ard Kit is installed, the machine prevents the unauthorized copying and/
or transmission of documents that contain  important confidential or personal information.
Use the Security Watermark of Advanced...

Default Setting (System Menu) 
OPERATION GUIDE8-103
8
Limitations:
- Scanning speed will be limited  to the speed of scanning 600 dpi image. (Printing speed will not 
be limited.)
- FAX transmission will be limited to the memory transmission.
Note: - The Printed Document Guard Kit should not fully prevents a leak of information. We do not guarantee any loss incurred while using this feature or when malfunction occurred with this 
feature.
- The guard pattern printed on the colored paper or paper that is...

Default Setting (System Menu) 
8-104OPERATION GUIDE
Optional Functions
You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine. 
You can use these applications for  a limited period on a trial basis.
• Printed Document Guard Kit
This prevents the unauthorized copying an d/or transmission of documents that contain important confidential or 
personal information. When a document is printed from a computer,...

Default Setting (System Menu) 
OPERATION GUIDE8-105
8
4In the license key entry screen, press [Official]. 
Some applications do not require you to enter an 
license key. If the license key entry screen does not 
appear, go to Step 5.
To use the application as a trial, press [Trial] without 
entering the license key.
5When the confirmation screen appears, press 
[Yes].
IMPORTANT: If you change the date/time while using 
an application, you will no l onger be able to use the 
application.
Checking...

Default Setting (System Menu) 
8-106OPERATION GUIDE
Accessibility (Enlarged Touch Panel Display) 
Touch panel characters and key displays can be enlarged. Use the numeric keys to select items and proceed 
to the next screen.
NOTE: Accessibility can be used only wi th Copying and Sending registered on the Quick Setup screen. 
To set functions othe r than those displayed in the a ccessibility screens, you must retu rn to the original display. 
Press the Accessibility Display  key again.
Press the...