Kyocera TASKalfa 250ci User Manual

Default Setting (System Menu) 
OPERATION GUIDE8-47
8
Duplex
Select binding orientation for duplex mode. The table below shows the available settings.
Use the procedure below to select a duplex setting.
1Press the  System Menu  key.
2Press [Printer] and [Change] of Duplex .
3Press [1-sided], 
[2-sided Bind LongEdge], or 
[2-sided Bind ShortEdge].
4Press [OK].
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specify the default number of copies.
1Press the System Menu...

Default Setting (System Menu) 
8-48OPERATION GUIDE
Orientation
Set the default orientation, Portrait or Landscape .
Use the procedure below to set the default orientation for printing.
1Press the  System Menu  key.
2Press [Printer] and [Change] of Orientation .
3Press [Portrait] or [Landscape].
4Press [OK].
Form Feed Timeout
Receiving print data from the computer, the machine ma y sometimes wait if there is no information signaling 
that the last page does not have any more data to be  printed. When the...

Default Setting (System Menu) 
OPERATION GUIDE8-49
8
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below 
shows the available settings.
Use the procedure below to specify a LF action.
1Press the  System Menu  key.
2Press [Printer], [ ] and [Change] of  LF Action.
3Press [LF Only], [LF an d CR] or [Ignore LF].
4Press [OK].
CR Action
Set the character return action when the machine receives  the character return code (character code 0DH)....

Default Setting (System Menu) 
8-50OPERATION GUIDE
Paper Feed Mode
While printing from the computer, select how to feed paper when the paper source and type are specified. The 
table below shows the available settings.
Use the procedure below to select the paper feed mode.
1Press the System Menu  key.
2Press [Printer], [ ] and [Change] of  Paper Feed 
Mode.
3Press [Auto] or [Fixed].
4Press [OK].
Item Description 
Auto Search the paper source that matches the  selected paper size and type.
Fixed Print on...

Default Setting (System Menu) 
OPERATION GUIDE8-51
8
Printing Reports/Sending Notice
Print reports to check the machine settings and status. Default settings for printing the result reports can also 
be configured. 
NOTE: If user login administration is enabled, you can only print by logging in with administrator privileges.
Printing Reports
Printable reports are as follows.
Status Page
Check the information including current settings, availa ble memory space, and optional equipment installed.
Font List...

Default Setting (System Menu) 
8-52OPERATION GUIDE
Network Status Page 
Check the information including network interface 
firmware version, network address and protocol.
Service Status Page
More detailed information is available than on the Status  Page. Service personnel usually print the service status 
pages for maintenance purpose.
Use the procedure below to print a report.
1Press the  System Menu  key.
2Press [Report] and [Next] of  Print Report.
3Press [Print] for the repo rt you want to print....

Default Setting (System Menu) 
OPERATION GUIDE8-53
8
Send Result Report
Automatically print a report of transmission result when a transmission is complete. The table below shows the 
available settings.
1Press the  System Menu  key.
2Press [Report], [Next] of  Result Report Setting, 
[Next] of  Send Result Report  and then [Change] of 
E-mail/Folder .
3Press [Off], [On], or [Error Only]. 
4Press [OK].
Item Description 
Off No result report printed.
On Result report automatically printed.
Transmitted...

Default Setting (System Menu) 
8-54OPERATION GUIDE
Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance. 
• Copy Density Adjustment …8-54
• Send/Box Density Adjust …8-55
• Drum Refresh …8-55
• Correcting Fine Black Lines …8-55
• System Initialization …8-56
• Display Brightness …8-56
• Silent Mode …8-57
• Auto Color Correction...8-58
• Color Registration...8-58
• Color Calibration Cycle...8-61
• Gray Adjustment...8-62
• Color Calibration...8-64
• Developer Refresh...8-64
• Laser...

Default Setting (System Menu) 
OPERATION GUIDE8-55
8
Send/Box Density Adjust
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels 
both in auto and manual density modes.
1Press the  System Menu  key.
2Press [ ], [Adjustment/Maintenance] and [Next] of 
Send/Box Dens ity Adjust..
3Press [Change] of  Auto or of Manual .
4Press [-3] - [+3] (Lighter-Darker) to adjust density.
5Press [OK].
Drum Refresh
Refresh the drum when image blur or white spots appear on...

Default Setting (System Menu) 
8-56OPERATION GUIDE
The table below shows the available settings.
NOTE: Using Correcting Fine Black Line can impair reprod
uction of fine characters. It is recommended to 
keep the default ([Off]).
Use the procedure below to specify the setting for correcting fine black lines.
1Press the System Menu  key.
2Press [ ], [Adjustment/Maintenance] and 
[Change] of Correcting Black Line .
3Press [Off], [On(Low)] or [On(High)].
4Press [OK].
System Initialization
Initialize the hard...