Kyocera TASKalfa 250ci User Manual

Default Setting (System Menu) 
OPERATION GUIDE8-27
8
You can use the number keypad to enter the 
number directly.
4Press [OK].
Border Erase to Back Page
Select the Border Erase Method for Back Page of a sheet. The table below shows the available settings.
NOTE: Refer to page 4-27 and  page 5-26 for Border Erase.
Use the procedure below to specify the bor der erase setting for the back of the page.
1Press the System Menu  key.
2Press [Common Settings], [ ], [Next] of  Function 
Defaults , [ ] and then...

Default Setting (System Menu) 
8-28OPERATION GUIDE
Use the procedure below to set the default margin width.
1Press the 
System Menu  key.
2Press [Common Settings], [ ], [Next] of  Function 
Defaults , [ ] and then [Change] of  Margin Default.
3Use the [+] or [-] to en ter the margin widths for  Left/
Right  and Top/Bottom(-0.75 - +0.75) .
You can use the number keypad to enter the 
number directly.
4Press [OK].
Auto Image Rotation
Select the default Auto Image Rotation settin g. The table below shows the...

Default Setting (System Menu) 
OPERATION GUIDE8-29
8
1Press the System Menu  key.
2Press [Common Settings], [ ], [Next] of  Function 
Defaults , [ ] twice, and then [Change] of  EcoPrint.
3Select [Off] or [On] for the default.
4Press [OK].
PDF/TIFF/JPEG Image
Select the default PDF/TIFF/JPEG file quality. Five opti ons are available from 1 Low Quality (High Comp.) to 5 
High Quality (Low Comp.).
NOTE: Higher quality will make t he stored files larger. 
Refer to page 5-14  for file formats. 
Use the...

Default Setting (System Menu) 
8-30OPERATION GUIDE
High Comp. PDF Image
Select the default High Comp.
This setting is only displayed when the optional PDF upgrade kit has been used.
The table below shows the available settings.
Use the procedure below to select the default q
uality setting for highly compressed PDF files.
1Press the System Menu  key.
2Press [Common Settings], [ ] and [Next] of 
Function Defaults . Press [ ] twice and [Change] of 
High Comp. PDF Image . 
3Select the default for...

Default Setting (System Menu) 
OPERATION GUIDE8-31
8
Repeat Copying
Select the Repeat Copy default. The options are as follows. The table below shows the available settings.
NOTE: This setting is not displayed when the optional Data Security Kit is in stalled or the Repeat Copy job is 
set to  0. 
Refer to  page 4-51  for Repeat Copy.
Use the procedure below to set the default Repeat Copy setting.
1Press the  System Menu  key.
2Press [Common Settings], [ ] and [Next] of 
Function Defaults . Press [ ]...

Default Setting (System Menu) 
8-32OPERATION GUIDE
4Press [OK].
JPEG/TIFF Print
Select the image size (resolution) when printing JPEG  or TIFF file. The table below shows the available settings.
Use the procedure below to set the default JPEG/TIFF Print settings.
1Press the  System Menu  key.
2Press [Common Settings], [ ], [Next] of  Function 
Defaults . Press [ ] twice and [Change] of  JPEG/
TIFF Print .
3Select the default for [F it to Paper Size], [Image 
Resolution], or [Fit  to Print Resolution]....

Default Setting (System Menu) 
OPERATION GUIDE8-33
8
Copy Settings
The following settings are available for copying functions.
• Paper Selection …8-33
• Auto Paper Selection …8-33
• Auto % Priority …8-34
• Reserve Next Priority …8-34
• Preset Limit …8-35
• Quick Setup Registration …8-36
NOTE: If user login administration is enabled, you can only change the settings by logging in with 
administrator privileges.
Paper Selection
Set the default paper selection. The table below shows the available settings....

Default Setting (System Menu) 
8-34OPERATION GUIDE
Use the procedure below to specify the ac
tion performed for Auto Paper Selection.
1Press the System Menu  key.
2Press [Copy] and [Change] of  Auto Paper 
Selection .
3Press [Most Suitable Size] or [Same as Original 
Size].
4Press [OK].
5Move to the copy screen and press the  Reset key.
Auto % Priority
When a paper source of different size from the origin al is selected, select whether automatic zoom (reduce/
zoom) is performed. The table below shows the...

Default Setting (System Menu) 
OPERATION GUIDE8-35
8
Preset Limit
Restrict the number of copies that can be made at one time. Options are 1-999 copies.
Use the procedure below to set the limit on the number of copies.
1Press the  System Menu  key.
2Press [Copy] and [Change] of  Preset Limit.
3Press [+] or [–] or use the numeric keys to enter the 
limit for the number of copies.
4Press [OK].
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
8-36OPERATION GUIDE
Quick Setup Registration 
Select the copying functions to be registered for Quick Setup. Six keys of the Quick Setup screen are allocated 
to typical functions but can be changed as necessar y. Six items from the following options are available.
• Paper Selection
•Zoom
• Staple/Punch
•Density
•Duplex
• Combine
• Collate/Offset
• Original Image
• Original Size
• Original Orientation
• Color Selection
• Continuous Scan
NOTE: Refer to Quick Setup Screen on...