Kyocera TASKalfa 250ci User Manual

Default Setting (System Menu) 
OPERATION GUIDE8-87
8
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
CAUTION: System initialization will erase Custom Document Boxes, data stored in Document Box, addresses 
in the Address Book, user property, account information, and settings.
NOTE: This item will not be displayed if the optional Data Security Kit is installed. Refer to the Data Security 
Kit (E) OPERATION GUIDE on the bundled CD-ROM  about the...

Default Setting (System Menu) 
8-88OPERATION GUIDE
Restarting the System
Restart the CPU without turning the main power switch 
off. Use this to deal with any unstable operation by the 
machine. (Same as the computer restart.) 
Use the procedure below to restart the system.
1Press the  System Menu  key.
2Press [System] and [Execute] of  Restart.
NOTE: If user login administration is disabled, the 
user authentication screen ap pears. Enter a login user 
name and password, and press [Login]. For this, you...

Default Setting (System Menu) 
OPERATION GUIDE8-89
8
Network Setup
The following network settings are available.
• Checking Host Name …8-89
• TCP/IP (IPv4) Setup …8-89
• TCP/IP (IPv6)  Setup …8-90
• Protocol Detail …8-92
• NetWare Setup …8-93
• AppleTalk Setup …8-94
• WSD Scan  Setup …8-95
• WSD Print Setup …8-95
• Secure Protocol …8-96
• IPSec Setting …8-98
• LAN Interface Setup …8-98
Checking Host Name
Check the host name of the machine. Use the procedure below.
1Press the  System Menu  key.
2Press...

Default Setting (System Menu) 
8-90OPERATION GUIDE
TCP/IP (IPv6) Setup
Set up TCP/IP (IPv6) to connect to the network. The default settings are TCP/IP Protocol:  On, TCP/IP (IPv6): 
Off . Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of  Network and then [Next] 
of  TCP/IP Setting .
3Press [Change] of  TCP/IP.
4Press [On] and then press [OK].
5Press [Next] of  IPv6.
6Press [Change] of  IPv6.
7Press [On].  IP Address (Link Local) appears.
8Press [OK].
9After changing the...

Default Setting (System Menu) 
OPERATION GUIDE8-91
8
9After changing the setting, restart the system or 
turn the machine OFF and then ON again. 
For detailed information on restarting the system, 
refer to Restarting the System on page 8-88 .
RA (Stateless) Settings
Select whether or not to use RA (Stateless). The RA (Stateless) settings are available when selecting [On] for 
TCP/IP (IPv6) . The default setting is  On. Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of...

Default Setting (System Menu) 
8-92OPERATION GUIDE
Protocol Detail
The table below lists the network related function settings. The network re lated functions are available when 
TCP/IP  is On.
Item Description Default 
SettingRestarting the 
System*
NetBEUI Selects whether or not to receive  documents using NetBEUI. On
Y
LPD Select whether or not to receive 
documents using LPD as the 
network protocol. On
Y
SMTP 
(E-mail TX) Select whether or not to send 
e-
mail  using SMTP. Off
N
POP3 
(E-mail RX)...

Default Setting (System Menu) 
OPERATION GUIDE8-93
8
Use the procedure below.
The following procedure is an example for specifying the SMTP (E-mail TX) settings.
1Press the System Menu  key.
2Press [System] and then [Next] of  Network to 
display the network settings screen.
3Display the item you want to set and press 
[Change] for that item. 
In this example, press [Change] of  SMTP (E-mail 
TX) .
4Press [On] or [Off].
5Press [OK].
6After changing the setting, restart the system or 
turn the machine OFF...

Default Setting (System Menu) 
8-94OPERATION GUIDE
3Press [On].
4Press the key for the frame type you want to use.
5Press [OK].
6After changing the setting, restart the system or 
turn the machine OFF and then ON again. 
For detailed information on restarting the system, 
refer to Restarting the System on page 8-88 .
AppleTalk Setup
Select the Apple Talk network connection.
Refer to AppleTalk Setup on page 2-12  about the procedures.
System - NetWare
Use NetWare to receive documents.
On Off Frame Type...

Default Setting (System Menu) 
OPERATION GUIDE8-95
8
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On. Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of  Network and then 
[Change] of  WSD Scan.
3Press [On] or [Off].
4Press [OK].
5After changing the setting, restart the system or 
turn the machine OFF and then ON again. 
For detailed information on restarting the system, 
refer to Restarting the System on page 8-88 .
WSD Print Setup
Select...

Default Setting (System Menu) 
8-96OPERATION GUIDE
Secure Protocol
Encrypt the communication between your PC and the machine using the SSL encryption. After changing the 
setting, restart the system or turn the machine OFF and then ON again. Fo r detailed information on restarting 
the system, refer to  Restarting the System on page 8-88.
The following Secure Protocol settings are available.
• SSL Setup …8-96
• IPP Security  Setup …8-96
• HTTP Security Setup …8-97
• LDAP Security  Setup …8-97
SSL Setup...