Kyocera FS 3040MFP User Manual

8
8-133
Default Setting (System Menu)
Protocol Detail
Make other network related settings. Item Description D efault SettingRestarting the 
System*
NetBEUI Selects whether or not to  receive documents using 
NetBEUI. On
×
LPD Select whether or not to 
receive documents using 
LPD as the network 
protocol. On
z
FTP (Server) Select  whether or not to 
receive documents using 
FTP. On
z
FTP (Client) Select whether or not to  send documents using FTP, 
and the number of the port 
to be used. On
Port number:...

8-134
Default Setting (System Menu)
Use the procedure below.
1In the Sys. Menu/Count. menu, press the U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [TCP/IP Settings].
6Press the OK...

8
8-135
Default Setting (System Menu)
8Press the OK key. The Protocol Detail menu appears.
9Press the U or V key to select the item for which you 
want to make settings.
10Press the OK  key. This displays the setting screen for 
the item selected in step 9.
The screen shown is the one when [FTP(Client)] is 
selected.
11Press the U  or V key to select [On] or [Off].
If you select [On] for each  of [FTP(Client)] and [IPP] and 
press the  OK key, a port number entry screen appears.
Press the  U or  V key or...

8-136
Default Setting (System Menu)
Network Security
The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
• IPSec Setting …8-136
• SSL Setting …8-137
• SNMPv3 Setting …8-142
IPSec Setting
Make this setting when you use  IPSec. The default setting is On and that of Rule Setting is also  Off.
Use the procedure below to make the setting.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System],...

8
8-137
Default Setting (System Menu)
6Press the OK key. IPSec appears.
7Press the U or V key to select [On] or [Off].
If you select [On] and press the  OK key, Rule Setting 
appears. Press the  U or  V key to select [On] or [Off].
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Network Setting menu.
SSL Setting
This allows you to use SSL network secu rity for communication. You can use SSL Setup to select whether or not SSL 
is used and to specify the IPP port and HTTP port...

8-138
Default Setting (System Menu)
4Press the OK key. The Network Setting menu appears.
5Press the U or V key to select [Secure Protocol].
6Press the OK  key. Secure Protocol appears.
7Press the U or V key to select [SSL].
8Press the OK  key. SSL appears.
9Press the U or V key to select [On] or [Off].
10Press the OK  key. Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
IPP Security
Specify the protocol to be used  for IPP. The default setting is IPP/IPP over SSL.
Use the...

8
8-139
Default Setting (System Menu)
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [Secure Protocol].
6Press the OK  key. Secure Protocol appears.
7Press the U or V key to select [IPP Security].
8Press the OK  key. IPP Security appears.
9Press the U or V key to select [IPP/IPP over SSL] or 
[IPPoverSSL only].
10Press the OK  key. Completed.  is displayed and the 
screen returns to the...

8-140
Default Setting (System Menu)
A login screen will appear. Then, enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [Secure Protocol].
6Press the OK  key. Secure Protocol appears.
7Press the U or V key to select [HTTP Security]. 
8Press the OK  key. HTTP Security appears....

8
8-141
Default Setting (System Menu)
LDAP Security
Specify the protocol to be used for LDAP. The default setting is  Off.
Use the procedure below to make the setting. 
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the...

8-142
Default Setting (System Menu)
8Press the OK key. LDAP Security appears.
9Press the U or V key to select [Off], [LDAPv3/TLS] or 
[LDAP over SSL].
10Press the OK  key. Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
SNMPv3 Setting
Sets up SNMPv3. The default setting is  Off. Use the procedure below.
Refer to Protocol Detail on page 8-133  about the procedures.
LDAP Security:a  b 
*********************
2  LDAPv3/TLS
3  LDAP over SSL
1 *Off
Downloaded From...