Kyocera FS 3040MFP User Manual

8
8-123
Default Setting (System Menu)
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below to specify the DHCP setting.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting]....

8-124
Default Setting (System Menu)
8Press the OK key. TCP/IP appears.
9Press the U or V key to select [On] and then press the 
OK  key.
Completed.  is displayed and the screen returns to the 
TCP/IP Settings menu.
10Press the U  or V key to select [IPv4 Setting].
11Press the OK  key. The IPv4 Setting menu appears.
12Press the U or V key to select [DHCP].
13Press the OK  key. DHCP appears.
14Press the U or V key to select [On] or [Off] and then 
press the  OK key.
Completed.  is displayed and the screen...

8
8-125
Default Setting (System Menu)
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off.
Use the procedure below to specify the Bonjour setting.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting]....

8-126
Default Setting (System Menu)
8Press the OK key. TCP/IP appears.
9Press the U or V key to select [On] and then press the 
OK  key. 
Completed.  is displayed and the screen returns to the 
TCP/IP Settings menu.
10Press the U  or V key to select [IPv4 Setting].
11Press the OK  key. The IPv4 Setting menu appears.
12Press the U or V key to select [Bonjour].
13Press the OK  key. Bonjour appears.
14Press the U or V key to select [On] or [Off] and then 
press the  OK key.
Completed.  is displayed and the...

8
8-127
Default Setting (System Menu)
TCP/IP (IPv6) Setup
Set up TCP/IP (IPv6) to connect to the network. The default setting is Off.
Use the procedure below to setup the TCP/IP (IPv6) setting.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select...

8-128
Default Setting (System Menu)
8Press the OK key. IPv6 Setting appears. 
9Press the U or V key to select [On] or [Off]. 
10Press the OK  key. Completed.  is displayed and the 
screen returns to the TCP/IP Settings menu. 
NetWare Setup
Select the NetWare network connection. After that,  select frame types for NetWare network from Auto, 
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is Off .
Use the procedure below to setup the NetWare setting.
1In the Sys. Menu/Count. menu, press the  U or...

8
8-129
Default Setting (System Menu)
6Press the OK key. NetWare appears.
7Press the U or V key to select [On] or [Off]. 
If you select [On] and press the  OK key, Frame Type 
appears. Press the  U or  V key to select the desired 
frame type.
The available frame types are as follows:
Auto
802.3
Ether-II
802.2
SNAP
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Network Setting menu.
For detailed information on restarting the system, refer to 
Restarting the System on page...

8-130
Default Setting (System Menu)
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [AppleTalk].
6Press the OK  key. AppleTalk appears.
7Press the U or V key to select [On] or [Off] and then 
press the  OK key.
Completed.  is displayed and the screen returns to the 
Network Setting menu.
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is  On.
Use the procedure below to setup the WSD-SCAN...

8
8-131
Default Setting (System Menu)
4Press the OK key. The Network Setting menu appears.
5Press the U or V key to select [WSD-SCAN].
6Press the OK  key. The WSD-SCAN menu appears.
7Press the U or V key to select [On] or [Off].
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Network Settings menu.
WSD Print Setup
Select whether or not to use WSD Print. The default setting is  On.
Use the procedure below to setup the WSD-PRINT setting.  The machine must be restarted after the...

8-132
Default Setting (System Menu)
4Press the OK key. The Network Setting menu appears.
5Press the U or V key to select [WSD-PRINT].
6Press the OK  key. The WSD-PRINT menu appears.
7Press the U or V key to select [On] or [Off].
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Network Settings menu. 
Network Setting:a  b 
*********************
2  NetWare
3  AppleTalk
[ Exit ]
1  TCP/IP Settings
WSD-PRINT:a  b 
1  Off
*********************2 *On
Downloaded From ManualsPrinter.com...