Kyocera FS 3040MFP User Manual

8
8-73
Default Setting (System Menu)
Printer Settings
Printing from computers, settings are generally made on the application software screen. However, the following 
settings are available for configuring  the defaults to customize the machine.
• Emulation Set …8-73
• EcoPrint …8-76
• Override A4/LTR …8-77
• Duplex …8-78
• Copies …8-79
• Orientation …8-80
• FormFeed Timeout …8-81
• LF Action …8-81
• CR Action …8-82
• Paper Feed Mode…8-83
NOTE: If user login administration is enabled, you can only ch...

8-74
Default Setting (System Menu)
Use the procedure below to select the emulation.
1In the Sys. Menu/Count. menu, press the U or V  key to 
select [Printer].
2Press the OK  key. The Printer menu appears.
3Press the U or V key to select [Emulation Set.].
 
4Press the OK  key. Emulation Set. appears.
5Press the U or V key to select the printer you want to 
emulate.
6Press the OK  key. Completed.  is displayed and the 
screen returns to the Printer menu. 
NOTE: If you select [KPDL] or [KPDL(Auto)], the...

8
8-75
Default Setting (System Menu)
When KPDL Is Selected for Emulation
When you use the KPDL emulation mode, set whether or not to output KPDL error reports. The default setting is Off. 
Use the procedure below to make the setting.
1In Emulation Set, press the  U or  V key to select [KPDL].
2Press the OK  key. KPDL Error Rpt appears.
3Press the U or V key to select [Off] or [On].
4Press the OK  key. Completed.  is displayed and the 
screen returns to the Printer menu.
When KPDL(Auto) Is Se lected for...

8-76
Default Setting (System Menu)
2Press the OK key. Alt. Emulation appears.
3Press the U or V  key to select the pr inter for alternative 
emulation.
4Press the OK  key. KPDL Error Rpt appears.
5Press the U or V key to select [Off] or [On].
6Press the OK  key. Completed.  is displayed and the 
screen returns to the Printer menu. 
EcoPrint
EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a problem.
Use the procedure below to specify the EcoPrint...

8
8-77
Default Setting (System Menu)
6Press the OK key. Completed.  is displayed and the 
screen returns to the Printer menu.
Override A4/LTR
Select whether to treat A4 size and Letter, which are simila r in size, as the same size when printing. The table below 
shows the available settings.
Use the procedure below to specify the override  A4/Letter setting. The default setting is On.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [Printer].
2Press the OK  key. The Printer menu...

8-78
Default Setting (System Menu)
Duplex
Select binding orientation for duplex mode. The table below shows the available settings.
Use the procedure below to select a duplex setting.
1In the Sys. Menu/Count. menu, press the U or V  key to 
select [Printer].
2Press the OK  key. The Printer menu appears.
3Press the U or V key to select [Duplex].
4Press the OK  key. Duplex appears.
5Press the U or V key to select [Off], [Bind Long Edge] 
or [Bind Short Edge].
6Press the OK  key. Completed.  is displayed...

8
8-79
Default Setting (System Menu)
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specify the default number of copies.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [Printer].
2Press the OK  key. The Printer menu appears.
3Press the U or V key to select [Copies].
4Press the OK  key. Copies appears.
5Press the U or V key or the numeric keys to set the 
default number of copies.
6Press the OK  key. Completed.  is displayed and the 
screen returns to...

8-80
Default Setting (System Menu)
Orientation
Set the default orientation, Portrait or Landscape .
Use the procedure below to set the default orientation for printing.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [Printer].
2Press the OK  key. The Printer menu appears.
3Press the U or V key to select [Orientation].
4Press the OK  key. Orientation appears.
5Press the U or V key to select [Portr ait] or [Landscape].
6Press the OK key. Completed.  is displayed and the 
screen returns to...

8
8-81
Default Setting (System Menu)
FormFeed Timeout
Receiving print data from the computer, the machine may sometimes wait if there is no information signalling that the 
last page does not have any more data to be printed.  When the preset timeout passes, the machine automatically 
prints paper. The options are between 5 and 495 seconds.
Use the procedure below to set the form feed timeout.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [Printer].
2Press the OK  key. The Printer menu...

8-82
Default Setting (System Menu)
1In the Sys. Menu/Count. menu, press the U or V  key to 
select [Printer].
2Press the OK  key. The Printer menu appears.
3Press the U or V key to select [LF Action].
4Press the OK  key. LF Action appears.
5Press the U or  V key to select [LF Only], [LF and CR] or 
[Ignore LF].
6Press the OK  key. Completed.  is displayed and the 
screen returns to the Printer menu.
CR Action
Set the character return action when the machine receives the character return code (character...