Konica Minolta magicolor 4695MF User Manual

Clearing Media Misfeeds 267
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
6Push down the levers.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 268
7Close the right door; slowly 
lower the scanner unit, and then 
close the front cover.
Clearing a Media Misfeed from the Switchback
1Open the machines front cover.
2Slowly raise the scanner unit, 
and open the cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 269
3Slowly lower the horizontal 
transport unit cover.
4Carefully pull out the misfed 
media.
5Slowly lower the scanner unit.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 270
6Close the front cover.
Clearing a Media Misfeed from the Horizontal Transport 
Area
1Open the machines front cover.
2Slowly raise the scanner unit, 
and open the cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 271
3Carefully pull out the misfed 
media.
4Close the cover, and slowly 
lower the scanner unit.
5Close the front cover.
Downloaded From ManualsPrinter.com Manuals 

Solving Problems with Media Misfeeds 272
Solving Problems with Media Misfeeds
Frequent misfeeds in any area indicate that area should be checked, 
repaired, or cleaned. Repeated misfeeds may also happen if you’re 
using unsupported print media or original media.
Symptom Cause Solution
Several 
sheets go 
through the 
machine 
together.The front edges of 
the media are not 
even.Remove the media and even up the 
front edges, then reload it.
The media is moist 
from humidity.Remove the moist media and...

Solving Problems with Media Misfeeds 273
Media is mis-
fed in the 
ADF.The loaded document 
does not meet the 
specifications.Load the correct document. For details 
on the documents that can be loaded, 
refer to “Documents that can be loaded 
into the ADF” on page 135.
The loaded document 
exceeds the maxi-
mum capacity.Load the document so that it does not 
exceed the maximum capacity. For 
details on the documents that can be 
loaded, refer to “Documents that can 
be loaded into the ADF” on page 135....

Solving Problems with Media Misfeeds 274
Media is mis-
feeding.Envelopes are facing 
the wrong way in Tray 
1.Load the envelopes in Tray 1 with the 
flaps facing up.
If the flaps are on the long edge, load 
the envelopes with the flap edge 
toward the machine and the flap side 
facing up.
Transparencies have 
collected static elec-
tricity in the tray.Remove the transparencies and load 
them in Tray 1 one sheet at a time. Do 
not fan transparencies before loading 
them. 
Unsupported media 
(wrong size,...

Solving Other Problems 275
Solving Other Problems
To order KONICA MINOLTA consumables, go to www.q-shop.com.
Symptom Cause Solution
Machine 
power is not 
on.The power cord is not 
correctly plugged into 
the outlet.Turn off the machine, confirm that the 
power cord is correctly plugged into 
the outlet, and then turn on the 
machine.
Something is wrong 
with the outlet con-
nected to the 
machine.Plug another electrical appliance into 
the outlet and see whether it operates 
properly.
The power switch...

Solving Other Problems 276
Images can-
not be 
printed from 
the digital 
camera.The connected digi-
tal camera is not 
compatible with 
PictBridge.Use a digital camera compatible with 
PictBridge.
The digital camera 
transfer mode is not 
set to PictBridge.Set the digital camera transfer mode to 
PictBridge.
CAMERA DIRECT 
for this unit is set to 
DISABLE.Change the setting for 
UTILITY/
ADMIN. MANAGEMENT/CAMERA 
DIRECT
 to ENABLE.
A public user is not 
specified for user 
authentication.Contact the...