Konica Minolta magicolor 1650EN User Manual

							Loading Media 5-14
4Load the envelopes flap side 
down in the tray.
Before loading enve-
lopes, press them down 
to make sure that all air is 
removed, and make sure 
that the folds of the flaps 
are firmly pressed; other-
wise the envelopes may 
become wrinkled or a 
media misfeed may 
occur.
Up to 10 envelopes can be loaded into the tray at one time.
For envelopes with the flap (Envelope C6 or Envelope DL), load 
the envelopes with the flap side inserted first.
5Slide the media guides against 
the edges of the envelopes.
6Reattach the dust cover.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media5-15
7Select MAIN MENU/PAPER MENU/INPUT TRAY/TRAY1/MEDIA 
SIZE
 and MEDIA TYPE in the configuration menu, and then select the 
settings for the size and type of paper that are loaded. See also “PAPER 
MENU” on page 4-8.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 5-16
Loading Labels/Postcard/Thick Stock and Letterhead
1Remove the dust cover from 
Tray 1.
2Remove any media from the 
tray.
3Slide the media guides to pro-
vide more space between them.
4Load the media face up in the 
tray.
Up to 50 sheets can be 
loaded into the tray at 
one time.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media5-17
5Slide the media guides against 
the edges of the media.
6Reattach the dust cover.
7Select MAIN MENU/PAPER MENU/INPUT TRAY/TRAY1/MEDIA 
SIZE
 and MEDIA TYPE in the configuration menu, and then select the 
settings for the size and type of paper that are loaded. See also “PAPER 
MENU” on page 4-8.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 5-18
Tray 2
Only Letter/A4 plain paper can be loaded in Tray 2.
Loading Plain Paper
1Pull out Tray 2 as far as possi-
ble.
2Lift up Tray 2 to remove it.
3Remove the lid from Tray 2.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media5-19
4Press down the media pressure 
plate to lock it into place.
5Load the paper face up in the 
tray.
Do not load above the 
100% line. Up to 500 
sheets (80 g/m
2 [21 lb]) of 
plain paper can be 
loaded into the tray at 
one time.
6Reattach the lid to Tray 2.
100%
75
50
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Media 5-20
7Reinsert Tray 2 into the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							Duplexing5-21
Duplexing
Select paper with high opacity for duplex (double sided) printing. Opacity 
refers to how effectively paper blocks out what is written on the opposite side 
of the page. If the paper has low opacity (high translucency), then the printed 
data from one side of the page will show through to the other side. Check 
your application for margin information. For best results, print a small quantity 
to make sure the opacity is acceptable.
Duplex (Double sided) printing can be done automatically with the duplex 
option installed and selected.
Note
Only Letter/A4 plain paper, 60–90 g/m2 (16–24 lb bond) can be 
autoduplexed. See “Print Media” on page 5-2.
Duplexing envelopes, labels, postcards, thick stock, or letterhead is not 
supported.
How do I autoduplex?
You should verify that the duplex option is physically installed on the printer to 
successfully duplex the job.
Check your application to determine how to set your margins for duplex 
printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip 
at the top.
If “Long Edge” is selected, the pages will be laid out to flip 
at the sides.
1
3
1
21
111
12
3
Downloaded From ManualsPrinter.com Manuals 
						

							Output Tray 5-22
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is per-
formed.
The following Order settings are available when “Booklet” is selected.
1Load plain paper into the tray.
2From the printer driver, specify the layout for duplex printing.
3Click OK.
With autoduplexing, the back side is printed first, and then the front 
side is printed.
Output Tray
All printed media is output to the face-down output tray on top of the printer. 
This tray has a capacity of approximately 100 sheets (A4/Letter) of 80 g/m2 
(21 lb) paper. 
If the media is stacked too high in the output tray, your printer may 
experience media misfeeds, excessive media curl, or static buildup. If “Left Binding” is selected, the pages can be folded as a 
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a 
right-bound booklet.
1
12
3
3
3
1 12
Downloaded From ManualsPrinter.com Manuals 
						

							Media Storage5-23
Media Storage
How do I store media?
„Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up 
too much and cause misfeeding.
„If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
„Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 
35°C [95°F]), and dust.
„Avoid media leaning against other objects or placing it in an upright posi-
tion.
Before using stored media, do a trial print and check print quality. 
Downloaded From ManualsPrinter.com Manuals