Konica Minolta magicolor 1650EN User Manual

							About the Control Panel 4-2
About the Control Panel
The control panel, located on the top of the printer, allows you to direct the 
printer’s operation. In addition, it displays the current status of the printer, 
including any condition that needs your attention.
Control Panel Indicators and Keys
No. Indicator Off On
1 The printer is not ready 
to accept data.The printer is ready to 
accept data.
2 No problem. The printer requires 
operator attention 
(usually accompanied by 
a status message in the 
message window.)
Ready
Error
Cancel
8
 MESSAGE 
 WINDOW
3
1
2
4
5 6
7
Ready
Error
Downloaded From ManualsPrinter.com Manuals 
						

							About the Control Panel4-3
No. Indicator Function
3 „Moves up in the menu structure
„Within a menu choice that is changeable char-
acter by character, scrolls upward through the 
available characters
4 „Moves right in the menu structure
„Moves right through the available menu choices
5 „Moves down in the menu structure.
„Within a menu choice that is changeable char-
acter by character, scrolls downward through 
the available characters
6 „Moves left in the menu structure
„Moves left through the available menu choices
7„Cancels the currently displayed menu choice
„Allows you to cancel one or all print jobs that 
are currently being printed or processed:
1. Press the Cancel key.
2. Press the ) or * keys to select either 
CANCEL 
JOB/CURRENT
 or CANCEL JOB/ALL
3. Press the Menu Select key.
The print job(s) is (are) cancelled.
8 „Enters the menu system
„Moves down in the menu structure
„Selects the displayed menu choice
Cancel
Downloaded From ManualsPrinter.com Manuals 
						

							About the Control Panel 4-4
Toner Supply Indicators
The indicators shown below will appear, indicating the amount of toner that 
remains in the yellow (Y), magenta (M), cyan (C), and black (K) toner car-
tridges.
IDLE
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-5
Configuration Menu Overview
The configuration menu accessible from the control panel is structured as 
shown below.
Menu
If MAIN MENU/SYSTEM DEFAULT/SECURITY/CONFIG/
ENABLE
 is set to ON, the user password or administrator password 
must be entered to display the main menu. The displayed menu is dif-
ferent according to the authority of the entered password.
For details on the default passwords, refer to “SYSTEM DEFAULT” on 
page 4-22.
PRINT MENU
PAPER MENU
INTERFACE MENU
SYSTEM DEFAULT
SERVICE MENU
QUALITY MENU
IDLE
LANGUAGE
MAIN MENU
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-6
MAIN MENU
PRINT MENU
With this menu, printer information, such as the configuration page and the 
demo page, can be printed.
All factory default values are shown in bold.
MENU MAPSettingsYES/NO
Prints the menu map.
CONFIGURA-
TION SettingsYES/NO
Prints the configuration page.
STATISTICS 
PAGESettingsYES/NO
Prints the statistics page such as the number of pages 
printed.
POSTSCRIPT
PCL
MENU MAP
DIRECTORY LIST
CONFIGURATION
FONT LIST
DEMO
STATISTICS PAGE
PRINT MENU
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-7
The amounts remaining for the supplies status and coverage informa-
tion displayed using the statistics page may be different from the 
actual amounts and should be used only as reference.
FONT LIST POST
SCRIPTSettingsYES/NO
Prints the PostScript font list.
PCLSettingsYES/NO
Prints the PCL font list.
DIRECTORY 
LISTSettingsYES/NO
Prints the directory list of the flash.
DEMOSettingsYES/NO
Prints the demo page.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-8
PAPER MENU
With this menu, the media used for printing can be managed.
* This menu item appears only if the duplex option is installed.
** These menu items appear only if an optional lower feeder unit is 
installed.
TRAY 1 MODE
TRAY1MEDIA SIZE
MEDIA TYPE
TRAY2**MEDIA SIZE
CUSTOM SIZE
AUTO CONTINUE
INPUT TRAY
PAGE RECOVERY
DUPLEX*
ORIENTATION
LENGTH (xx)
WIDTH (xx)
PAPER MENU
TRAY CHAINING**
MAP**
LOGICAL TRAY 0
MODE
LOGICAL TRAY 9
~
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-9
All factory default values are shown in bold.
INPUT 
TRAYTRAY 1 
MODESettingsAUTO/CASSETTE
When printing from Tray 1, select whether the paper 
size and paper type set from the printer driver or the 
MEDIA SIZE and MEDIA TYPE settings set by 
selecting 
MAIN MENU/PAPER MENU/INPUT 
TRAY/TRAY 1
 in the control panel have priority.
If 
AUTO is selected, the printer driver settings have 
priority during printing.
If 
CASSETTE is selected, printing is performed 
when the printer driver settings and the control 
panel settings are all the same.
TRAY1 MEDIA 
SIZESettingsLETTER/LEGAL/
EXECUTIVE/A4/A5/B5/
B5(ISO)/G LETTER/
STATEMENT/FOLIO/UK 
QUARTO/FOOLSCAP/G 
LEGAL/C6/DL/
J-POSTCARD/KAI 16/
KAI 32/16K/SP FOLIO/
OFICIO/CUSTOM
Select the setting for the size of paper 
loaded into Tray 1.
The default setting for North 
America is 
LETTER. The default 
setting for all other regions is 
A4.
MEDIA 
TYPESettingsPLAIN PAPER/LABELS/
LETTERHEAD/ENVELOPE/
POSTCARD/THICK1/
THICK2
Select the setting for the type of paper 
loaded into Tray 1.
TRAY2 MEDIA 
SIZESettingsLETTER/A4
Select the setting for the size of paper 
loaded into Tray 2.
The default setting for North 
America is 
LETTER. The default 
setting for all other regions is 
A4.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 4-10
CUSTOM 
SIZEWIDTH
(xx)Settings92-216 mm
(3.63-8.50 inch)*
* With inch measurements, the 
decimal point does not appear 
in the message window.
For example, 3.63 inches 
appears as 363.
Specify the width of the custom-sized 
paper loaded into Tray 1.
On the model for North America, 
the settings appear in inches and 
the menu item appears as 
WIDTH(IN). On the models for 
all other regions, the settings 
appear in millimeters and the 
menu item appears as 
WIDTH(MM).
LENGTH
(xx)Settings„With plain paper
195-356 mm 
(7.69-14.01 
inch)*
„With thick stock
184-297 mm 
(7.24-11.70 
inch)*
* With inch measurements, the 
decimal point does not appear 
in the message window. 
For example, 7.69 inches 
appears as 769.
Specify the length of the custom-sized 
paper loaded into Tray 1.
On the model for North America, 
the settings appear in inches and 
the menu item appears as 
LENGTH(IN). On the models for 
all other regions, the settings 
appear in millimeters and the 
menu item appears as 
LENGTH(MM).
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview4-11
AUTO 
CONTINUESettingsON/OFF
If OFF is selected, an error occurs if the size of 
paper being printed on is different from the size of 
paper specified in the printer driver.
If 
ON is selected, no error occurs if the size of paper 
being printed on is different from the size of paper 
specified in the printer driver.
TRAY 
CHAININGSettingsYES/NO
If YES is selected and the specified paper tray runs 
out of paper during printing, a paper tray loaded with 
paper of the same size is automatically selected so 
printing can continue.
If 
NO is selected and the specified paper tray runs 
out of paper, printing stops.
MAP MODESettingsON/OFF
Select whether or not the Tray Mapping 
function is used.
LOGI-
CAL 
TRAY 
0-9SettingsPHYSICAL TRAY 1/ 
PHYSICAL TRAY 2
Specify whether jobs received from 
another manufacturer’s printer driver are 
printed using Tray 1 or Tray 2.
PHYSICAL TRAY 2 is the default only 
for 
LOGICAL TRAY 2. The default for 
all other logical trays is 
PHYSICAL 
TRAY 1
.
DUPLEXSettingsOFF/SHORTEDGE/LONGEDGE
If LONGEDGE is selected, the pages will be printed on both sides 
of the paper for long-edge binding.
If 
SHORTEDGE is selected, the pages will be printed on both 
sides of the paper for short-edge binding.
ORIEN-
TATIONSettingsPORTRAIT/LANDSCAPE
Specify the orientation of the media.
Downloaded From ManualsPrinter.com Manuals