Konica Minolta magicolor 1650EN User Manual

							Cleaning the Printer 7-16
11Align the shaft on each end of 
the toner cartridge with its hold-
ers, and then insert the car-
tridge.
Note
Do not touch the contact 
indicated in the illustration.
Downloaded From ManualsPrinter.com Manuals 
						

							Cleaning the Printer7-17
12Press in the magenta toner car-
tridge until it locks into place.
13Close the front cover.
Downloaded From ManualsPrinter.com Manuals 
						

							Cleaning the Printer 7-18
Cleaning the Media Feed Rollers for Tray 2
Be sure to remove the duplex option before cleaning the media feed rollers 
for Tray 2.
1If the duplex option is installed, remove it.
2Remove the dust cover from Tray 1.
Close Tray 1 and the output tray.
3Lift the printer off of Tray 2 and 
temporarily place it on a sturdy 
flat surface.
4Clean the media feed rollers by 
wiping them with a soft, dry 
cloth.
Downloaded From ManualsPrinter.com Manuals 
						

							Cleaning the Printer7-19
5Lift the printer and reinstall it on 
top of Tray 2.
6Open Tray 1 and reattach the dust cover.
7If you removed the duplex option in step 1, reinstall it.
Downloaded From ManualsPrinter.com Manuals 
						

							Cleaning the Printer 7-20
Cleaning the Media Feed Rollers for the attachment
Be sure to remove the duplex option before cleaning the media feed rollers 
for the attachment.
1If the duplex option is installed, remove it.
2Remove the dust cover from Tray 1.
Close Tray 1 and the output tray.
3Lift the printer off of the attach-
ment and temporarily place it on 
a sturdy flat surface.
4Clean the media feed rollers by 
wiping them with a soft, dry 
cloth.
Downloaded From ManualsPrinter.com Manuals 
						

							Cleaning the Printer7-21
5Lift the printer and reinstall it on 
top of the attachment.
6Open Tray 1 and reattach the dust cover.
7If you removed the duplex option in step 1, reinstall it.
Downloaded From ManualsPrinter.com Manuals 
						

							Cleaning the Printer 7-22
Cleaning the Duplex Feed Rollers
1Open the duplex cover.
2Clean the feed rollers by wiping 
them with a soft, dry cloth.
3Carefully close the duplex cover.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction 8-2
Introduction
This chapter provides information to aid you in resolving printer problems you 
may encounter, or at least guide you to the proper sources for help. 
Printing a Configuration Page
Print a configuration page to verify the printer is configured correctly.Printing the configuration page page 8-2
Preventing media misfeeds page 8-4
Understanding the media path page 8-5
Clearing media misfeeds page 8-5
Solving problems with media misfeeds page 8-19
Solving other problems page 8-21
Solving problems with printing quality page 8-25
Status, error, and service messages page 8-31
Press Key Until Display Reads
IDLE
MENU
MAIN MENU
MAIN MENU 
PRINT MENU
PRINT MENU 
MENU MAP
 PRINT MENU 
CONFIGURATION
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a Configuration Page8-3
CONFIGURATION 
YES
The configuration page prints and the 
printer goes back to 
IDLE. Press Key Until Display Reads
Downloaded From ManualsPrinter.com Manuals