Konica Minolta bizhub 601 User Manual

751/6012-14
Using copy functions2
2.6 Selecting Finishing settings
Various settings can be selected for sorting and finishing copies fed into the 
output tray.
The following Finishing settings are available.
*1If no finisher is installed and all of the following conditions are met, printed 
copies can be fed out and sorted in an alternating crisscross pattern.
– 8-1/2 × 11 or 5-1/2 × 8-1/2-size (A4- or B5-size) paper is used.
– Paper of the same size and type is loaded with the w orientation in one...

751/6012-15
Using copy functions2
*5The Z-Fold setting is available only if the Z folding unit is installed with the 
optional finisher.
2
Note 
Certain finishing settings cannot be used together.
Follow the procedures described below to select Finishing settings.
2.6.1 Selecting the finishing method
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Select the desired Finishing settings.
– To return to the main screen, touch [Main Screen].
3
Touch [OK].
The Basic screen appears...

751/6012-16
Using copy functions2
2.6.2 Selecting Staple/Punch settings
1
In the Basic screen, touch [Finishing].
2
Touch [Staple/Punch].
– To return to the main screen, touch [Main Screen].
The Staple/Punch screen appears.
Downloaded From ManualsPrinter.com Manuals 

751/6012-17
Using copy functions2
3
Touch the button for the desired settings, and then touch [Position 
Setting].
4
Select the desired position.
– Touch [Auto] to automatically determine the stapling or hole-punching 
position according to the orientation of the loaded original. The paper is 
stapled or holes are punched along the long side of the paper if the 
original length is 11-11/16 inch (297 mm) or less or along the short side 
of the paper if the original length is more than 11-11/16 inch (297...

751/6012-18
Using copy functions2
2.6.3 Selecting a folding or binding setting
1
In the Basic screen, touch [Finishing].
2
Touch [Fold/Bind].
– To return to the main screen, touch [Main Screen].
The Fold/Bind screen appears.
3
Select the desired settings.
Downloaded From ManualsPrinter.com Manuals 

751/6012-19
Using copy functions2
– To cancel the setting, touch [No].
4
Touch [OK], and then touch [OK] in the next screen that appears. 
Otherwise, touch [Main Screen].
The Basic screen appears again.
Downloaded From ManualsPrinter.com Manuals 

751/6012-20
Using copy functions2
2.7 Selecting not to rotate the image
Copies can be printed with the image not rotated to fit the orientation of the 
loaded paper.
2
Note 
Depending on the paper size and zoom ratio, some parts of the image may be 
lost.
Follow the procedure described below to select the setting to not rotate the 
image.
1
Touch [Auto Rotate OFF].
– To cancel the setting for not rotating the image, touch [Auto Rotate OFF] 
again.
Downloaded From ManualsPrinter.com Manuals 

751/6012-21
Using copy functions2
2.8 Selecting the quality of the original
Select an original quality setting. Select the setting for the original type to 
better adjust the copy quality.
The following Original Type settings are available.
Follow the procedure described below to select an Original Type setting.
1
Position the original to be copied.
– For details on positioning the original, refer to Feeding the original on 
page 1-11.
2
Touch the Original Settings tab.
The Original Settings screen...

751/6012-22
Using copy functions2
3
Touch [Original Type].
The Original Type screen appears.
4
Touch the button for the quality setting most appropriate for the 
loaded original.
– To return to the main screen, touch [Main Screen].
5
Touch [OK].
The Original Settings screen appears again.
Downloaded From ManualsPrinter.com Manuals 

751/6012-23
Using copy functions2
2.9 Selecting the density settings
Specify the copy density and background density. Adjust to the best density 
according to the status of the originals.
The following density adjustments are available.
Follow the procedures described below to select the density settings.
2.9.1 Adjusting the print density (Density settings)
1
Touch [Density/Background] on the Basic screen.
The Density/Background screen appears.
2
Touch [Density].
The Density screen appears....