Konica Minolta bizhub 601 User Manual

751/6012-24
Using copy functions2
3
Select the desired Density setting.
– Each time [Light] or [Dark] is touched, the density is lightened or 
darkened by one level.
– To select the center setting (default setting), touch [Standard].
– Touch [Auto] to have the machine detect the density of the original image 
and automatically select the appropriate exposure for the copy.
– To return to the main screen, touch [Main Screen].
4
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic...

751/6012-25
Using copy functions2
2
Touch [Background Removal].
The Background Removal screen appears.
3
Select the desired Background Removal setting.
– Each time [Light] or [Dark] is touched, the density is lightened or 
darkened by one level.
– To select the center setting (default setting), touch [Standard].
– To return to the main screen, touch [Main Screen].
4
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
Downloaded From ManualsPrinter.com Manuals 

751/6012-26
Using copy functions2
2.10 Selecting the Paper settings
2.10.1 Selecting a Paper Type setting for the bypass tray
If paper other than plain paper, such as OHP transparencies or label sheets, is 
loaded in the bypass tray, be sure to change the paper type setting as 
described below.
2
Note 
A paper type for the other trays than the bypass tray can be selected in the User 
setting. For details, refer to the User’s Guide [Copy Operations].
2
Reminder 
If special paper is loaded into the bypass...

751/6012-27
Using copy functions2
2
Touch the button for the bypass tray, and then touch [Change 
Settings].
– To return to the main screen, touch [Main Screen].
– To specify a special paper for any paper tray other than the bypass tray, 
touch the button for the corresponding paper tray.
– If a setting for special paper is selected for the bypass tray, that tray is 
not selected automatically with the Auto Paper setting.
3
Touch [Paper Type].
4
Select the appropriate setting for the type of special...

751/6012-28
Using copy functions2
Touch the button for the desired paper type.
– To print on thin paper, tab paper, fine paper, recycled paper and label 
sheets, touch [↓] or [↑].
– [Tab Paper] cannot be selected if “Paper Size” is set to “Standard Size”, 
“Custom Size” or “Wide Paper”.
5
Touch [OK], and then touch [OK] in the next two screens that appear. 
Otherwise, touch [Main Screen].
The Basic screen appears again.
Downloaded From ManualsPrinter.com Manuals 

751/6012-29
Using copy functions2
2.10.2 Selecting a Paper Size setting for the bypass tray
The paper size can be set for the bypass tray so that it can be used with the 
specified paper size.
2
Note 
For details on loading paper, refer to the User’s Guide [Copy Operations].
The paper size can be selected for the bypass tray in any of the following ways.
*1In order to specify a custom paper size in Enlarge Display mode, the 
custom paper size must first be stored before entering Enlarge Display 
mode....

751/6012-30
Using copy functions2
2
Touch the button for the bypass tray, and then touch [Change 
Settings].
– To return to the main screen, touch [Main Screen].
3
Touch [Paper Size].
4
Touch either [Auto Detect] or select the desired paper size.
Downloaded From ManualsPrinter.com Manuals 

751/6012-31
Using copy functions2
– If a button other than [Auto Detect] was touched, select the desired paper 
size, and then touch [OK].
!
Detail 
In order to specify a custom paper size in Enlarge Display mode, the custom 
paper size must first be stored before entering Enlarge Display mode.
[Standard Size], [Custom Size] or [Wide Paper] cannot be selected if “Paper Type” 
is set to “Tab Paper”.
5
Touch [OK], and then touch [OK] in the next two screens that appear. 
Otherwise, touch [Main Screen].
The...

751/6012-32
Using copy functions2
2.11 Scanning the next original to be copied while a 
copy job is being printed (next job reservation)
The settings for the next copy job can be specified and the original can be 
scanned while a job is being printed so that it can be printed once the current 
copy job is finished.
!
Detail 
Up to 51 copy jobs, including the current copy job, can be queued.
A copy job can be reserved after scanning of the loaded original is finished. The 
next job cannot be reserved...

751/6012-33
Using copy functions2
2.12 Pausing scanning/printing
Follow the procedure described below to temporarily stop scanning the 
original and stop the printing operation.
1
Press the [Stop] key while an original is being scanned or a job is being 
printed.
– Scanning/printing temporarily stops.
– If an original is being scanned for a job, pressing the [Stop] key 
temporarily stops scanning.
The message Job has stopped. appears.
2
To continue all temporarily stopped jobs, press the [Start] key.
–...