Konica Minolta bizhub 601 User Manual

User’s Guide  [Enlarge Display Operations]
Downloaded From ManualsPrinter.com Manuals 

751/601x-1
Introduction
Thank you for choosing this machine.
The bizhub 751/601 User’s Guide [Enlarge Display Operations] contains 
details on the operation of the various functions available in the Enlarge 
Display mode of the bizhub 751/601 and on the various operating precautions. 
In order to ensure that this machine is used correctly and efficiently, carefully 
read the Enlarge Display Mode Operations volume of the User’s Guide before 
using the machine.
For descriptions on trademarks and...

751/601x-2
[   ]
Names highlighted as shown above indicate keys on the control panel and 
buttons in the touch panel.
Downloaded From ManualsPrinter.com Manuals 

751/601x-3
Contents
1 Before use
1.1 Names of control panel parts and their functions  ................... 1-2
1.2 Adjusting the angle of the control panel ................................... 1-4
1.2.1 To adjust the angle of the control panel  ......................................1-4
1.3 Screens in Enlarge Display mode .............................................. 1-6
1.3.1 Displaying screens in Enlarge Display mode  ...............................1-6
1.4 Touch panel...

751/601x-4
2.5 Selecting a combined copy setting  ......................................... 2-12
2.6 Selecting Finishing settings ..................................................... 2-14
2.6.1 Selecting the finishing method ..................................................2-15
2.6.2 Selecting Staple/Punch settings ................................................2-16
2.6.3 Selecting a folding or binding setting  ........................................2-18
2.7 Selecting not to rotate the image...

751/601x-5
3.3.6 Background Removal  ................................................................3-21
3.3.7 Scan Size  ...................................................................................3-23
3.3.8 Original Settings  ........................................................................3-24
3.4 Using a program  ....................................................................... 3-27
3.5 Checking the destinations ....................................................... 3-29
4...

1
Before use
Downloaded From ManualsPrinter.com Manuals 

751/6011-2
Before use1
1 Before use
1.1 Names of control panel parts and their functions
2
Note 
For details, refer to the User’s Guide [Copy Operations], the User’s Guide 
[Network Scan/Fax/Network Fax Operations].
No.Part nameDescription
1 Touch panel Displays various screens and messages.
Specify the various settings by directly touching the 
panel.
2 Main Power indicator Lights up in green when the machine is turned on with 
the main power switch.
3 [Power] (auxiliary power) 
keyPress to turn on/off...

751/6011-3
Before use1
5 [Utility/Counter] key Press to display the Meter Count screen and the Utility 
screen.
6 [Reset] key Press to clear all settings (except programmed settings) 
entered in the control panel and touch panel.
7 [Stop] key Pressing the [Stop] key during an operation temporarily 
stops the operation.
8 [Proof Copy] key Press to print a single proof copy to be checked before 
printing a large number of copies. (See p. 2-34)
9 [Start] key Press to start the operation. When this machine...

751/6011-4
Before use1
1.2 Adjusting the angle of the control panel
The control panel can be adjusted to either of three angles.
In addition, the control panel can be tilted to the left.
Adjust the control panel to the angle that allows for easy operation.
1.2.1 To adjust the angle of the control panel
1
Pull the control panel release lever toward you to raise or lower the 
control panel.
➀ Upper position (base position)
➁ Middle position
➂ Lower position
➃ Left tilt position
Downloaded From...