Konica Minolta bizhub 601 User Manual

751/6011-5
Before use1
2
To tilt the control panel to the left, hold the bottom of the control panel, 
and then tilt the panel to the left.
– Do not grab the touch panel when turning the control panel to the left or 
right.
Downloaded From ManualsPrinter.com Manuals 

751/6011-6
Before use1
1.3 Screens in Enlarge Display mode
1.3.1 Displaying screens in Enlarge Display mode
1
Press the [Copy] or [Fax/Scan] key in the control panel to display the 
desired screen.
2
Press the [Enlarge Display] key in the control panel.
– Depending on the settings specified in Accessibility mode, a message 
appears, requesting confirmation to cancel the settings that cannot be 
specified in Enlarge Display mode. For details on specifying settings in 
the Accessibility screen, refer to...

751/6011-7
Before use1
!
Detail 
The default settings for Enlarge Display mode can be changed.
To change the default settings, specify desired settings in Enlarge Display mode, 
and then press the [Accessibility] key. On the Accessibility Setting screen 2/2, 
touch [Default Enlarge Display Settings], press the [Copy] key or the [Fax/Scan] 
key, and then specify Current Setting.
The default settings can be also changed in Utility mode. For details, refer to the 
Users Guide [Copy Operations].
Downloaded...

751/6011-8
Before use1
1.4 Touch panel
1.4.1 Touch panel operation
To activate a function or to select a setting, lightly touch the button in the touch 
panel for the desired function or setting.
2
Reminder 
Do not apply extreme pressure to the touch panel, otherwise it may be scratched 
or damaged. Never push down on the touch panel with force, and never use a 
hard or pointed object to make a selection in the touch panel.
1.4.2 Icons that appear in the screen
IconDescription
This button appears when...

751/6011-9
Before use1
1.4.3 Paper type icons
2
Note 
For details, refer to the User’s Guide [Copy Operations].
If paper other than plain paper is specified for the selected paper tray when 
using a copy function, the icon indicating the paper type appears under 
Paper in the Basic screen.
Paper type icons that appear
Transparency Special Paper Thick Paper
Letterhead Colored Paper Trace
User Paper1 User Paper2 User Paper3
Thin Paper Tab paper Fine
Recycled Labels
Downloaded From ManualsPrinter.com Manuals 

751/6011-10
Before use1
1.4.4 Paper supply icons
The amount of paper remaining is indicated in the Copy mode screen where 
the paper size is selected. For details about the screen for selecting the paper 
size, refer to Selecting the Paper settings on page 2-4.
Paper supply icons that appear
IconDescription
This icon indicates that very little paper remains in the paper tray.
This icon indicates that paper is not loaded in the paper tray.
Downloaded From ManualsPrinter.com Manuals 

751/6011-11
Before use1
1.5 Feeding the original
2
Note 
For details, refer to the User’s Guide [Copy Operations] and the User’s Guide 
[Network Scan/Fax/Network Fax Operations].
The original can be fed in either of the following ways. Be sure to position the 
original correctly according to the type of original being scanned.
-Using the ADF
-Using the original glass
1.5.1 Loading the original into the ADF
1
Place the original in the original feed tray in the order to be scanned 
with the side to be...

751/6011-12
Before use1
1.5.2 Placing the original on the original glass
1
Lift open the ADF.
– When placing the original on the original glass, be sure to lift open the 
ADF at least 20°. If the original is placed on the original glass without the 
ADF being lifted at least 20°, the correct original size will not be detected.
2
Place the original on the original glass with the side to be scanned 
faces down.
– Load the original pages so that the top of the original is toward the back 
or the left side...

751/6011-13
Before use1
1.6 Specifying original settings
2
Note 
For details, refer to the User’s Guide [Copy Operations].
The following describes necessary settings depending on the status and 
placement of the originals to copy them as desired.
For details on selecting the original type when using fax/scanning functions, 
refer to Original Settings on page 3-24.
1.6.1 Copying originals of mixed sizes (Mixed Original 
setting)
Originals of different sizes can be loaded together into the ADF to be fed...

751/6011-14
Before use1
3
Place the original in the original feed tray in the order to be scanned 
with the side to be scanned faces up.
– Slide the guides against the edges of the original.
– Load the original pages into the ADF so that the top of the pages is 
toward the left side of the machine.
4
In the main screen, touch the Original Settings tab.
The Original Settings screen appears.
Downloaded From ManualsPrinter.com Manuals