Konica Minolta bizhub 601 User Manual

							User’s Guide  [Enlarge Display Operations]
Downloaded From ManualsPrinter.com Manuals 
						

							751/601x-1
Introduction
Thank you for choosing this machine.
The bizhub 751/601 User’s Guide [Enlarge Display Operations] contains 
details on the operation of the various functions available in the Enlarge 
Display mode of the bizhub 751/601 and on the various operating precautions. 
In order to ensure that this machine is used correctly and efficiently, carefully 
read the Enlarge Display Mode Operations volume of the User’s Guide before 
using the machine.
For descriptions on trademarks and copyrights, refer to [Trademarks/
Copyrights].
Views of the actual equipment may be slightly different from the illustrations 
used in this Enlarge Display Mode Operations volume of the User’s Guide.
Explanation of manual conventions
7 CAUTION 
CAUTION
%Failure to observe instructions highlighted in this manner may result in serious 
injuries or property damage. 
Observe all cautions in order to ensure safe use of this machine.
2
Reminder 
Text highlighted in this manner indicates operation precautions. Carefully read 
and observe this type of information.
!
Detail 
Text highlighted in this manner provides more detailed information concerning 
operating procedures and other descriptions.
2
Note 
Text highlighted in this manner indicates sections containing additional 
information. If necessary, refer to the indicated sections.
Downloaded From ManualsPrinter.com Manuals 
						

							751/601x-2
[   ]
Names highlighted as shown above indicate keys on the control panel and 
buttons in the touch panel.
Downloaded From ManualsPrinter.com Manuals 
						

							751/601x-3
Contents
1 Before use
1.1 Names of control panel parts and their functions  ................... 1-2
1.2 Adjusting the angle of the control panel ................................... 1-4
1.2.1 To adjust the angle of the control panel  ......................................1-4
1.3 Screens in Enlarge Display mode .............................................. 1-6
1.3.1 Displaying screens in Enlarge Display mode  ...............................1-6
1.4 Touch panel  ................................................................................. 1-8
1.4.1 Touch panel operation .................................................................1-8
1.4.2 Icons that appear in the screen  ...................................................1-8
1.4.3 Paper type icons  ..........................................................................1-9
1.4.4 Paper supply icons  ....................................................................1-10
1.5 Feeding the original  .................................................................. 1-11
1.5.1 Loading the original into the ADF  ..............................................1-11
1.5.2 Placing the original on the original glass  ...................................1-12
1.6 Specifying original settings ...................................................... 1-13
1.6.1 Copying originals of mixed sizes (Mixed Original setting)  ......1-13
1.6.2 Loading folded originals (Z-Folded Original setting)  ..............1-15
1.6.3 Selecting the original orientation (Original Direction settings)  ...1-17
1.6.4 Selecting the position of the binding margin 
(Original Binding Position/Binding Position settings)  ................1-19
2 Using copy functions
2.1 General copy operation .............................................................. 2-2
2.2 Selecting the Paper settings ...................................................... 2-4
2.2.1 Automatically selecting the paper size (Auto Paper setting)  ....2-4
2.2.2 Manually selecting the desired paper size ...................................2-6
2.3 Specifying a Zoom setting ......................................................... 2-7
2.3.1 Selecting a zoom ratio .................................................................2-8
2.4 Selecting original and copy settings  ......................................... 2-9
2.4.1 Selecting single-sided or double-sided copies .........................2-10
Downloaded From ManualsPrinter.com Manuals 
						

							751/601x-4
2.5 Selecting a combined copy setting  ......................................... 2-12
2.6 Selecting Finishing settings ..................................................... 2-14
2.6.1 Selecting the finishing method ..................................................2-15
2.6.2 Selecting Staple/Punch settings ................................................2-16
2.6.3 Selecting a folding or binding setting  ........................................2-18
2.7 Selecting not to rotate the image  ............................................ 2-20
2.8 Selecting the quality of the original ......................................... 2-21
2.9 Selecting the density settings .................................................. 2-23
2.9.1 Adjusting the print density (Density settings) ............................2-23
2.9.2 Adjusting the background density 
(Background Removal settings) .................................................2-24
2.10 Selecting the Paper settings .................................................... 2-26
2.10.1 Selecting a Paper Type setting for the bypass tray ...................2-26
2.10.2 Selecting a Paper Size setting for the bypass tray  ....................2-29
2.11 Scanning the next original to be copied while a copy job 
is being printed (next job reservation) .................................... 2-32
2.12 Pausing scanning/printing ....................................................... 2-33
2.13 Printing a proof to check the settings (Proof Copy)  .............. 2-34
3 Using fax/scan functions
3.1 General fax/scan operation ........................................................ 3-2
3.2 Specifying a destination ............................................................. 3-4
3.2.1 Selecting a destination from the address book ...........................3-5
3.2.2 Selecting a destination from the job log  ......................................3-7
3.2.3 Selecting a destination with an LDAP search ..............................3-8
3.2.4 Directly typing in the number .....................................................3-10
3.3 Specifying scanning settings (Scan Settings)  ........................ 3-13
3.3.1 Simplex/Duplex ..........................................................................3-13
3.3.2 Original Type ..............................................................................3-15
3.3.3 Resolution ..................................................................................3-17
3.3.4 Density .......................................................................................3-18
3.3.5 File Type  ....................................................................................3-20
Downloaded From ManualsPrinter.com Manuals 
						

							751/601x-5
3.3.6 Background Removal  ................................................................3-21
3.3.7 Scan Size  ...................................................................................3-23
3.3.8 Original Settings  ........................................................................3-24
3.4 Using a program  ....................................................................... 3-27
3.5 Checking the destinations ....................................................... 3-29
4 Logging on and logging off
4.1 When a logon screen appears ................................................... 4-2
4.1.1 When the screen to enter the user name appears  ......................4-2
4.1.2 When the screen to enter the account name and password 
appears ........................................................................................4-5
Downloaded From ManualsPrinter.com Manuals 
						

							1
Before use
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-2
Before use1
1 Before use
1.1 Names of control panel parts and their functions
2
Note 
For details, refer to the User’s Guide [Copy Operations], the User’s Guide 
[Network Scan/Fax/Network Fax Operations].
No.Part nameDescription
1 Touch panel Displays various screens and messages.
Specify the various settings by directly touching the 
panel.
2 Main Power indicator Lights up in green when the machine is turned on with 
the main power switch.
3 [Power] (auxiliary power) 
keyPress to turn on/off machine operations. When turned 
off, the machine enters a state where it conserves 
energy.
4 [Mode Memory] key Programmed fax/scan settings can be recalled to be 
used again. (See p. 3-27)
1
2
4
5
3
6
7
12
11 8 13
14
15 16
109
17
18
19
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-3
Before use1
5 [Utility/Counter] key Press to display the Meter Count screen and the Utility 
screen.
6 [Reset] key Press to clear all settings (except programmed settings) 
entered in the control panel and touch panel.
7 [Stop] key Pressing the [Stop] key during an operation temporarily 
stops the operation.
8 [Proof Copy] key Press to print a single proof copy to be checked before 
printing a large number of copies. (See p. 2-34)
9 [Start] key Press to start the operation. When this machine is ready 
to begin the operation, the indicator on the [Start] key 
lights up in blue. If the indicator on the [Start] key lights 
up in orange, the operation cannot begin.
Press to restart a stopped job.
10 Data indicator Flashes in blue while a print job or fax is being received.
Lights up in blue while a print job or fax is queued to be 
printed or is being printed.
11 [C] (clear) key Press to clear a value (such as the number of copies, a 
zoom ratio, or a size) entered using the keypad.
12 Keypad Use to type in the number of copies to be produced.
Use to type in the zoom ratio.
Use to type in the various settings.
13 [Enlarge Display] key Press to enter or exit Enlarge Display mode.
14 [Accessibility] key Press to display the screen for specifying settings for 
user accessibility functions.
15 [Power  Save]  key Press to enter Low Power mode. While the machine is in 
Low Power mode, the indicator on the [Power Save] key 
lights up in green and the touch panel goes off. To 
cancel Low Power mode, press the [Power Save] key 
again.
16 [Access] key If user authentication or account track settings have 
been applied, press this key after entering the user name 
and password (for user authentication) or the account 
name and password (for account track) in order to use 
this machine.
17 Brightness dial Use to adjust the brightness of the touch panel.
18 [Fax/Scan] key Press to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the indicator on 
the [Fax/Scan] key lights up in green.
19 [Copy] key Press to enter Copy mode. (As a default, the standard-
sized Copy mode screen is displayed.) 
While the machine is in Copy mode, the indicator on the 
[Copy] key lights up in green.
No.Part nameDescription
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-4
Before use1
1.2 Adjusting the angle of the control panel
The control panel can be adjusted to either of three angles.
In addition, the control panel can be tilted to the left.
Adjust the control panel to the angle that allows for easy operation.
1.2.1 To adjust the angle of the control panel
1
Pull the control panel release lever toward you to raise or lower the 
control panel.
➀ Upper position (base position)
➁ Middle position
➂ Lower position
➃ Left tilt position
Downloaded From ManualsPrinter.com Manuals