Konica Minolta bizhub 601 User Manual

							751/6011-15
Before use1
5
Touch [Mixed Original].
– To cancel the Mixed Original setting, touch [Mixed Original] again to 
deselect it.
1.6.2 Loading folded originals (Z-Folded Original setting)
If folded originals are loaded into the ADF to be copied, the original size is 
correctly detected.
2
Note 
Load the original into the ADF.
The length of the first page of the original is detected, and all pages of the original 
are scanned at that size.
2
Reminder 
Unfold folded originals before loading them into the ADF. If the original is copied 
without being unfolded, a paper misfeed may occur.
1
Position the original to be copied.
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-16
Before use1
2
In the main screen, touch the Original Settings tab.
The Original Settings screen appears.
3
Touch [Z-Folded Original].
– To cancel the Z-Folded Original setting, touch [Z-Folded Original] again 
to deselect it.
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-17
Before use1
1.6.3 Selecting the original orientation (Original Direction 
settings)
When copying double-sided originals or making double-sided copies or 
combined copies, specify the original orientation, otherwise the copies may 
not be printed in the correct page order or correct front and back page 
arrangement.
1
Position the original to be copied.
– For details on positioning the original, refer to Feeding the original on 
page 1-11.
2
In the Basic screen, touch [Duplex/Combine]. Otherwise, touch the 
Original Settings tab.
SettingDescription
Select this setting for an original loaded with the top toward the 
back of this machine.
Select this setting for an original loaded with the top toward the 
front of this machine.
Select this setting for an original loaded into the ADF with the top 
of the original toward the left side of this machine.
Select this setting for an original placed on the original glass with 
the top of the original toward the right side of this machine.
Select this setting for an original loaded into the ADF with the top 
of the original toward the right side of this machine.
Select this setting for an original placed on the original glass with 
the top of the original toward the left side of this machine.
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-18
Before use1
3
Touch [Original Direction].
From the Duplex/Combine screen
From the Original Settings screen
The Original Direction screen appears.
4
Touch the button for the orientation of the loaded original, and then 
touch [OK].
– To return to the main screen, touch [Main Screen].
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-19
Before use1
1.6.4 Selecting the position of the binding margin (Original 
Binding Position/Binding Position settings)
If a double-sided original is loaded into the ADF, specify the position of the top 
of the back side of the original by specifying the binding margin position for 
the original.
1
Position the original to be copied.
– For details on positioning the original, refer to Feeding the original on 
page 1-11.
2
In the Basic screen, touch [Duplex/Combine]. Otherwise touch the 
Original Settings tab.
SettingDescription
Left Bind 
LeftSelect this setting if the original is loaded with the binding margin at the left.
Top Select this setting if the original that is loaded has a binding margin at the 
top.
Right Bind 
RightSelect this setting if the original is loaded with the binding margin at the 
right.
Auto With this setting, the binding margin is set at the top or at the left.
Select this setting to automatically select the position of the binding margin.
If the original length is 11-11/16 inch (297 mm) or less, a binding position 
along the long side of the original is selected.
If the original length is more than 11-11/16 inch (297 mm), a binding position 
along the short side of the original is selected.
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-20
Before use1
3
In the Duplex/Combine screen, touch [Original Binding Pos.]. 
Otherwise, touch [Binding Position] in the Original Settings screen.
From the Duplex/Combine screen
From the 
Original Settings screen
4
Touch the button for the desired binding margin position, and then 
touch [OK].
From the Original Binding Position screen
Downloaded From ManualsPrinter.com Manuals 
						

							751/6011-21
Before use1
From the Binding Position screen
– To return to the main screen, touch [Main Screen].
Downloaded From ManualsPrinter.com Manuals 
						

							2
Using copy 
functions
Downloaded From ManualsPrinter.com Manuals 
						

							751/6012-2
Using copy functions2
2 Using copy functions
2.1 General copy operation
2
Note 
For details on the copy operation, refer to the User’s Guide [Copy Operations].
This section contains information on the general operation for making copies.
1
Press the [Copy] key in the control panel, and then press the [Enlarge 
Display] key.
The Copy mode screen appears in Enlarge Display mode.
2
Position the original to be copied.
– For details on positioning the original, refer to Feeding the original on 
page 1-11
.
3
Specify the desired copy settings.
– For details on specifying original settings, refer to page 1-13.
– For details on selecting the Paper settings, refer to page 2-4.
– For details on selecting the Zoom setting, refer to page 2-7.
– For details on selecting the original and copy settings, refer to page 2-9.
– For details on selecting a Combine setting, refer to page 2-12.
– For details on selecting Finishing settings, refer to page 2-14.
– For details on specifying settings to not rotate the image, refer to 
page 2-20.
– For details on selecting the original image quality, refer to page 2-21.
Downloaded From ManualsPrinter.com Manuals 
						

							751/6012-3
Using copy functions2
– For details on selecting a copy density setting, refer to page 2-23.
– To cancel the setting and select the default, press the [Reset] key.
4
Using the keypad, type in the desired number of copies.
– If the number of copies was incorrectly entered, press the [C] (clear) key 
in the keypad, and then specify the correct number of copies.
5
Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals