Home > Konica > Printer > Konica Minolta bizhub 601 User Manual

Konica Minolta bizhub 601 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Konica Minolta bizhub 601 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							751/6012-4
    Using copy functions2
    2.2 Selecting the Paper settings
    The paper size can be selected automatically according to the original size or 
    it can be specified manually. Specify the paper size according to the 
    corresponding procedure, depending on the desired copy settings.
    2.2.1 Automatically selecting the paper size (Auto Paper 
    setting)
    The size of the loaded original is detected, and copies are produced using 
    paper of the same size.
    If the Full Size Zoom setting was specified, paper of the same size as the 
    original is selected.
    If the zoom ratio was increased or decreased, a paper size that corresponds 
    to the specified zoom ratio is automatically selected.
    2
    Note 
    The Auto Zoom setting and the Auto Paper setting cannot both be selected 
    at the same time. If the Auto Paper Select was selected at the Auto Zoom 
    setting, the Zoom screen appears. Touch the button for the desired zoom ratio.
    1
    In the Basic screen, touch [Paper].
    The Paper screen appears.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-5
    Using copy functions2
    2
    Touch [Auto].
    – To return to the main screen, touch [Main Screen].
    3
    Touch [OK].
    The Basic screen appears again.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-6
    Using copy functions2
    2.2.2 Manually selecting the desired paper size
    The paper tray loaded with paper of the desired size can be selected manually. 
    By also selecting the Auto Zoom setting, the most appropriate zoom ratio is 
    selected based on the size of the loaded original and the specified paper size.
    2
    Note 
    Load the papers of the appropriate size into the paper tray in advance. For details 
    on loading paper, refer to the User’s Guide [Copy Operations].
    1
    In the Basic screen, touch [Paper].
    The Paper screen appears.
    2
    Select the paper tray loaded with paper of the desired size.
    – To return to the main screen, touch [Main Screen].
    3
    Touch [OK].
    The Basic screen appears again.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-7
    Using copy functions2
    2.3 Specifying a Zoom setting
    The zoom ratio can be set in order to make a copy on paper with a size 
    different than the original or to enlarge or reduce the size of the copy image.
    The zoom ratio can be specified in any of the following ways.
    *1The Auto Zoom setting and the Auto Paper setting cannot both be 
    selected at the same time.
    If the Auto Zoom was selected at the Auto Paper Select setting, the 
    Paper screen appears. Touch the button for the desired paper.
    *2When selecting a Reduce setting or a programmed zoom ratio, Minimal 
    can be selected. Touch [Minimal] to produce a copy with the original image 
    slightly reduced (93.0%) and centered in the paper.
    The zoom ratio of the Minimal setting can be changed (between 90.0% 
    and 99.9%). For details, refer to the User’s Guide [Copy Operations].
    *3The programmed zoom ratios can be changed. For details, refer to the 
    User’s Guide [Copy Operations].
    Follow the procedure described below to specify the Zoom setting.
    SettingDescription
    Auto Zoom
    *1The most appropriate zoom ratio is automatically selected based 
    on the size of the loaded original and the specified paper size.
    Full  Size A copy that is the same size as the original (100.0%) is produced.
    Enlarge The most suitable enlargement zoom ratios for copying from 
    common standard original sizes to standard paper sizes are 
    preset.
    Reduce
    *2The most suitable reduction zoom ratios for copying from 
    common standard original sizes to standard paper sizes are 
    preset.
    Zoom By using the keypad, a zoom ratio between 25.0% and 400.0% 
    can be typed in directly without changing the height-to-width 
    ratio.
    Set Zoom Ratio
    *2*3Programmed zoom ratios can be recalled to be used again for 
    copying.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-8
    Using copy functions2
    2.3.1 Selecting a zoom ratio
    1
    In the Basic screen, touch [Zoom].
    The Zoom screen appears.
    2
    Touch the button for the desired zoom ratio.
    – To return to the main screen, touch [Main Screen].
    – If Enlarge, Reduce or Set Zoom Ratio was selected, select the 
    desired zoom ratio, and then touch [OK].
    – If Zoom was selected, use the keypad to type in the desired zoom ratio, 
    and then touch [OK].
    – Touch [+] to enlarge the zoom ratio, and touch 
    [-] to reduce the zoom ratio in 0.1% increments.
    3
    Touch [OK].
    The Basic screen appears again.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-9
    Using copy functions2
    2.4 Selecting original and copy settings
    The type of original and copy can be specified.
    The following original and copy settings are available.
    *1If 1 > 2 or 2 > 2 is selected, specify the binding margin position for the 
    copy and the orientation of the loaded original, otherwise the copies will not 
    be printed as desired.
    For details on specifying the original orientation, refer to Selecting the 
    original orientation (Original Direction settings) on page 1-17.
    *2If 2 > 1 or 2 > 2 is selected, select the position of the binding margin 
    and the orientation of the loaded original, otherwise the copies will not be 
    printed as desired.
    For details on specifying the original orientation, refer to Selecting the 
    original orientation (Original Direction settings) on page 1-17.
    For details on specifying the binding margin position of the original, refer to 
    Selecting the position of the binding margin (Original Binding Position/
    Binding Position settings) on page 1-19.
    !
    Detail 
    When the original is scanned from the original glass using the 1 > 2, 2 > 1 or 
    2 > 2 settings, the scanned pages are stored and printed together.
    Follow the procedures described below to select original and copy settings.
    SettingDescription
    1 > 1 Select this setting to produce single-sided copies from single-sided 
    originals.
    1 > 2
    *1Select this setting to produce one double-sided copy from two single-
    sided originals.
    2 > 1
    *2Select this setting to produce two single-sided copies from one double-
    sided original.
    2 > 2
    *1*2Select this setting to produce double-sided copies from double-sided 
    originals.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-10
    Using copy functions2
    2.4.1 Selecting single-sided or double-sided copies
    1
    In the Basic screen, touch [Duplex/Combine].
    The Duplex/Combine screen appears.
    2
    Touch [Original > Copy].
    – To return to the main screen, touch [Main Screen].
    The Duplex Settings screen appears.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-11
    Using copy functions2
    3
    Touch the button for the desired settings, and then touch [OK].
    – If 1 > 2 or 2 > 2 is selected, touch [Output Bind Direction], select the 
    binding position for the copy, and then touch [OK].
    – If Auto is selected, the binding margin is set at the top or at the left. The 
    binding position is automatically determined according to the orientation 
    of the loaded original. If the original length is 11-11/16 inch (297 mm) or 
    less, a binding position along the long side of the paper is selected. If the 
    original length is more than 11-11/16 inch (297 mm), a binding position 
    along the short side of the paper is selected.
    4
    Touch [Close].
    The Basic screen appears again.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-12
    Using copy functions2
    2.5 Selecting a combined copy setting
    Two original images can be combined and printed on a single page, reducing 
    paper use.
    1
    In the Basic screen, touch [Duplex/Combine].
    The Duplex/Combine screen appears.
    2
    Touch [Combine].
    – To return to the main screen, touch [Main Screen].
    The Combine screen appears.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							751/6012-13
    Using copy functions2
    3
    Touch [2in1], and then touch [OK].
    4
    Touch [Close].
    The Basic screen appears again.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Konica manuals Comments (0)

    Related Manuals for Konica Minolta bizhub 601 User Manual