Konica Minolta bizhub 601 User Manual

751/6012-4
Using copy functions2
2.2 Selecting the Paper settings
The paper size can be selected automatically according to the original size or 
it can be specified manually. Specify the paper size according to the 
corresponding procedure, depending on the desired copy settings.
2.2.1 Automatically selecting the paper size (Auto Paper 
setting)
The size of the loaded original is detected, and copies are produced using 
paper of the same size.
If the Full Size Zoom setting was specified, paper of the...

751/6012-5
Using copy functions2
2
Touch [Auto].
– To return to the main screen, touch [Main Screen].
3
Touch [OK].
The Basic screen appears again.
Downloaded From ManualsPrinter.com Manuals 

751/6012-6
Using copy functions2
2.2.2 Manually selecting the desired paper size
The paper tray loaded with paper of the desired size can be selected manually. 
By also selecting the Auto Zoom setting, the most appropriate zoom ratio is 
selected based on the size of the loaded original and the specified paper size.
2
Note 
Load the papers of the appropriate size into the paper tray in advance. For details 
on loading paper, refer to the User’s Guide [Copy Operations].
1
In the Basic screen, touch...

751/6012-7
Using copy functions2
2.3 Specifying a Zoom setting
The zoom ratio can be set in order to make a copy on paper with a size 
different than the original or to enlarge or reduce the size of the copy image.
The zoom ratio can be specified in any of the following ways.
*1The Auto Zoom setting and the Auto Paper setting cannot both be 
selected at the same time.
If the Auto Zoom was selected at the Auto Paper Select setting, the 
Paper screen appears. Touch the button for the desired paper.
*2When...

751/6012-8
Using copy functions2
2.3.1 Selecting a zoom ratio
1
In the Basic screen, touch [Zoom].
The Zoom screen appears.
2
Touch the button for the desired zoom ratio.
– To return to the main screen, touch [Main Screen].
– If Enlarge, Reduce or Set Zoom Ratio was selected, select the 
desired zoom ratio, and then touch [OK].
– If Zoom was selected, use the keypad to type in the desired zoom ratio, 
and then touch [OK].
– Touch [+] to enlarge the zoom ratio, and touch 
[-] to reduce the zoom ratio in...

751/6012-9
Using copy functions2
2.4 Selecting original and copy settings
The type of original and copy can be specified.
The following original and copy settings are available.
*1If 1 > 2 or 2 > 2 is selected, specify the binding margin position for the 
copy and the orientation of the loaded original, otherwise the copies will not 
be printed as desired.
For details on specifying the original orientation, refer to Selecting the 
original orientation (Original Direction settings) on page 1-17.
*2If 2 >...

751/6012-10
Using copy functions2
2.4.1 Selecting single-sided or double-sided copies
1
In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
2
Touch [Original > Copy].
– To return to the main screen, touch [Main Screen].
The Duplex Settings screen appears.
Downloaded From ManualsPrinter.com Manuals 

751/6012-11
Using copy functions2
3
Touch the button for the desired settings, and then touch [OK].
– If 1 > 2 or 2 > 2 is selected, touch [Output Bind Direction], select the 
binding position for the copy, and then touch [OK].
– If Auto is selected, the binding margin is set at the top or at the left. The 
binding position is automatically determined according to the orientation 
of the loaded original. If the original length is 11-11/16 inch (297 mm) or 
less, a binding position along the long side of...

751/6012-12
Using copy functions2
2.5 Selecting a combined copy setting
Two original images can be combined and printed on a single page, reducing 
paper use.
1
In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
2
Touch [Combine].
– To return to the main screen, touch [Main Screen].
The Combine screen appears.
Downloaded From ManualsPrinter.com Manuals 

751/6012-13
Using copy functions2
3
Touch [2in1], and then touch [OK].
4
Touch [Close].
The Basic screen appears again.
Downloaded From ManualsPrinter.com Manuals