Konica Minolta bizhub 601 User Manual

751/6011-15
Before use1
5
Touch [Mixed Original].
– To cancel the Mixed Original setting, touch [Mixed Original] again to 
deselect it.
1.6.2 Loading folded originals (Z-Folded Original setting)
If folded originals are loaded into the ADF to be copied, the original size is 
correctly detected.
2
Note 
Load the original into the ADF.
The length of the first page of the original is detected, and all pages of the original 
are scanned at that size.
2
Reminder 
Unfold folded originals before loading them...

751/6011-16
Before use1
2
In the main screen, touch the Original Settings tab.
The Original Settings screen appears.
3
Touch [Z-Folded Original].
– To cancel the Z-Folded Original setting, touch [Z-Folded Original] again 
to deselect it.
Downloaded From ManualsPrinter.com Manuals 

751/6011-17
Before use1
1.6.3 Selecting the original orientation (Original Direction 
settings)
When copying double-sided originals or making double-sided copies or 
combined copies, specify the original orientation, otherwise the copies may 
not be printed in the correct page order or correct front and back page 
arrangement.
1
Position the original to be copied.
– For details on positioning the original, refer to Feeding the original on 
page 1-11.
2
In the Basic screen, touch [Duplex/Combine]....

751/6011-18
Before use1
3
Touch [Original Direction].
From the Duplex/Combine screen
From the Original Settings screen
The Original Direction screen appears.
4
Touch the button for the orientation of the loaded original, and then 
touch [OK].
– To return to the main screen, touch [Main Screen].
Downloaded From ManualsPrinter.com Manuals 

751/6011-19
Before use1
1.6.4 Selecting the position of the binding margin (Original 
Binding Position/Binding Position settings)
If a double-sided original is loaded into the ADF, specify the position of the top 
of the back side of the original by specifying the binding margin position for 
the original.
1
Position the original to be copied.
– For details on positioning the original, refer to Feeding the original on 
page 1-11.
2
In the Basic screen, touch [Duplex/Combine]. Otherwise touch the...

751/6011-20
Before use1
3
In the Duplex/Combine screen, touch [Original Binding Pos.]. 
Otherwise, touch [Binding Position] in the Original Settings screen.
From the Duplex/Combine screen
From the 
Original Settings screen
4
Touch the button for the desired binding margin position, and then 
touch [OK].
From the Original Binding Position screen
Downloaded From ManualsPrinter.com Manuals 

751/6011-21
Before use1
From the Binding Position screen
– To return to the main screen, touch [Main Screen].
Downloaded From ManualsPrinter.com Manuals 

2
Using copy 
functions
Downloaded From ManualsPrinter.com Manuals 

751/6012-2
Using copy functions2
2 Using copy functions
2.1 General copy operation
2
Note 
For details on the copy operation, refer to the User’s Guide [Copy Operations].
This section contains information on the general operation for making copies.
1
Press the [Copy] key in the control panel, and then press the [Enlarge 
Display] key.
The Copy mode screen appears in Enlarge Display mode.
2
Position the original to be copied.
– For details on positioning the original, refer to Feeding the original on...

751/6012-3
Using copy functions2
– For details on selecting a copy density setting, refer to page 2-23.
– To cancel the setting and select the default, press the [Reset] key.
4
Using the keypad, type in the desired number of copies.
– If the number of copies was incorrectly entered, press the [C] (clear) key 
in the keypad, and then specify the correct number of copies.
5
Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals