Konica Minolta bizhub 420 User Manual

Application Functions6
bizhub 500/420/360 (Phase 3) 6-19
8Specify the tray loaded with insertions.
– Touch [Insert Paper], select the insertion tray source to highlight it, 
then touch [OK].
9Select whether or not to copy onto the insertions.
– To copy onto the insertions, touch [Copy] under Insert Type to 
highlight it.
– To leave the insertions blank, touch [Blank] under Insert Type to 
highlight it.
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-20 bizhub 500/420/360 (Phase 3)
10Confirm settings on the Insert Sheet Check Screen, and make setting 
change, if desired.
– To change the insertion tray source, return to step 8.
To change the insertion type, return to step 9.
– To change insertion locations, touch [Edit] and return to step 7.
11Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Insert Sheet Screen or Insert Sheet Check 
Screen to cancel the setting change.
12Select additional copy...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-21
6.4 Inserting Different Original Images into Printed Sets 
(Insert Image)
Use this function to insert images scanned from the original glass into a set 
of original document scanned from the ADF at specified locations, then 
output the combined images as a finished set.
Function overview
The images scanned from original glass will be added as the next page of 
specified document pages.
e.g. Specifying pages 2 and 5 as insertion locations:...

6Application Functions
6-22 bizhub 500/420/360 (Phase 3)To copy using Insert Image
0Use the ADF to scan the original to have image insertions.
If the number of original sheets exceeds 80, use Separate Scan mode. 
For details, see Separate Scan Setting on page 4-69.
0Use the original glass to scan images to be inserted.
0Up to 30 locations can be specified for the original from 1 to 999 pages.
1Load the original in the ADF.
– Be sure to arrange the original in page order, and then place it with 
the first...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-23
4Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
5Touch [Sheet/Cover/Chapter Insert], then touch [Insert Image].
The Insert Image Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-24 bizhub 500/420/360 (Phase 3)
6Specify the image insertion location by entering page number.
– Touch [P---] to highlight it, then enter the desired page number from 
the control panel keypad.
– Touch up/down arrow keys to scroll the screen to use all 30 keys.
– Touch [Select].
The Insert Image Check Screen will be displayed.
?What if the specified locations are fewer than the scanned insertion 
images?
%The insertion images exceeding specified locations will be added at 
the...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-25
7Check the locations on the Insert Image Check Screen, and make 
setting change, if desired.
– To change the image insertion locations, touch [Edit] and return to 
step 6.
8Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Insert Image Screen or Insert Image Check 
Screen to cancel the setting change.
9Select additional copy conditions, as desired.
10Press [Start] on the control panel.
– The machine starts scanning the...

6Application Functions
6-26 bizhub 500/420/360 (Phase 3)
13Touch [Finish].
14Press [Start] on the control panel.
The machine will start printing when ready for output.
2
Note 
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function, 
press [Reset] on the control panel.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-27
6.5 Locating Title Pages on Front Side (Chapters)
Use this function with the ADF in duplex copying. If a title page is to be 
arranged on the back side of double-sided copy, a blank page will be 
automatically created on that page for the purpose of locating the title page 
on the front side of the next sheet.
Function overview
In Chapters function, a blank page will be inserted before the specified title 
page in order to locate it on the front...

6Application Functions
6-28 bizhub 500/420/360 (Phase 3)
2%2
Chapter paper: Copy 
InsertThe same page insertion is performed as above, and the chapter pages 
(2/3 and 5/6) will be printed on paper from another tray source.
Simplex/DuplexDescription
Downloaded From ManualsPrinter.com Manuals