Konica Minolta bizhub 420 User Manual

Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-5With Combine Pages specified, the machine will automatically select a 
recommended zoom ratio to reduce the original image for copying.
The zoom ratio recommended for each setting is listed below.
-2 in 1: e0.707
-4 in 1: e0.500
-8 in 1: e0.353
!
Detail 
The machine can be set to disable the automatic selection of 
recommended zoom ratio in order to accept the ratio entered manually.
For details, see Auto Zoom for Combine/Booklet on...

5Combine Originals/ Original Image Type
5-6 bizhub 500/420/360 (Phase 3)0Load the original in the ADF.
0If the original is placed on the original glass, Separate Scan mode will 
function automatically.
0The tray loaded with the same paper size as the original will be 
automatically selected to make a copy of combined original.
To use paper size different from the original size, then select the desired 
zoom ratio manually.
0The tray selection will accord with the order specified in Tray Priority. For...

Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-7
2Touch [Combine Originals] tab on the Basic Screen.
The Combine Originals Screen will be displayed.
3Select the desired Combine Pages mode.
– When selecting [4 in 1] or [8 in 1], touch [Horizontal] or [Vertical] to 
specify the direction of page arrangement.
Downloaded From ManualsPrinter.com Manuals 

5Combine Originals/ Original Image Type
5-8 bizhub 500/420/360 (Phase 3)– If changing the direction of page arrangement to start from the right 
side, touch [Margin] to select [Right], then touch [OK].
2
Reminder 
Load copy paper of the same size as the original, if not loaded in any tray.
2
Note 
To release Combine Pages, touch the highlighted key again to deselect 
it, or press [Reset] on the control panel.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings...

Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-9
5.2 Specifying Original Settings (Original)
The following procedure describes how to specify the original type, 
orientation of the positioned original, and page margin of the original to be 
copied.
Copying Mixed Size Original (Mixed Original)
Use the Mixed Original mode to copy the mixed size original set scanned 
from the ADF with Auto Paper Select or Auto Zoom activated.
Function overview
Setting itemDescription
Auto Paper...

5Combine Originals/ Original Image Type
5-10 bizhub 500/420/360 (Phase 3)0Load the original in the ADF.
Combination of the original sizes to be mixed depends on the widest 
original width (width of the ADF original guides). For details, see 
Positioning Original into the ADF on page 10-16.
0Adjust the paper guides to the original securely. If incorrectly loaded, the 
original may not be fed straight, resulting in paper misfeed or damage to 
the original.
0Do not load more than 80 sheets of the original,...

Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-11
3Touch [Combine Originals] tab on the Basic Screen.
The Combine Originals Screen will be displayed.
4Touch [Mixed Original] to highlight it.
2
Note 
To release Mixed Original, touch the highlighted key again to deselect it, 
or press [Reset] on the control panel.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen....

5Combine Originals/ Original Image Type
5-12 bizhub 500/420/360 (Phase 3)Copying Z-Folded Original (Z-Folded Original)
If folded original are loaded in to the ADF to be copied, the original size is 
correctly detected.
0Load the original in to the ADF.
0The length of the first page of the original is detected, and all pages of the 
original are scanned at that size.
1Position the original to be copied.
2Touch [Combine Originals].
The Combine Original Screen will be displayed.
Downloaded From...

Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-13
3Touch [Z-Folded Original].
2
Note 
To release Z-Folded Original, touch the highlighted key again to deselect 
it, or press [Reset] on the control panel.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touch [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 

5Combine Originals/ Original Image Type
5-14 bizhub 500/420/360 (Phase 3)Specifying Orientation of Original (Original Direction)
Specify the orientation of the original placed on the ADF or on original glass.
Without this setting, the copy results may not be obtained as expected, 
especially when making copies under following conditions.
-Copying from double-sided original
-Making double-sided copies
-Combine Pages
-Booklet
-Book Copy
-Staple, etc.
Function overview
Using ADFUsing original...