Konica Minolta bizhub 420 User Manual

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-63
7Touch [OK].
The Basic Screen will be restored.
8Select additional copy conditions, as desired.
– For details on specifying the binding margin for double-sided 
copies, see Creating Margin of Copy Image (Page Margin) on 
page 6-76.
9Press [Start] on the control panel.
The original image will be scanned into memory.
When completed, the message Scanning stopped./ Press [Start] to 
continue. will be displayed in the message area.
10Replace the...

4Basic Copy Operations
4-64 bizhub 500/420/360 (Phase 3)
12Press [Start].
All the data in memory will be output to make double-sided copies.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
2
Note 
Using the original glass to scan the double-sided original, it does not 
matter which of the two duplex modes (1%2 or 2%2) is specified.
Downloaded From ManualsPrinter.com Manuals 

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-65To make single-sided copies from double-sided original
Follow the procedure below to make single-sided copies from double-sided 
original using the ADF.
When using the original glass to scan the double-sided original, select 1%1 
mode.
0Specify the Original Direction according to the orientation of the original 
loaded in the ADF. For details, see Specifying Orientation of Original 
(Original Direction) on page 5-14.
0The desired copy result may not...

4Basic Copy Operations
4-66 bizhub 500/420/360 (Phase 3)
2Touch [Simplex/Duplex] on the Basic Screen.
The Simplex/Duplex Screen will be displayed.
3Touch [2%1] to highlight it.
4Specify the original set direction according to the orientation of 
positioned original.
– Touch [Original Direction] to display the Original Direction Screen.
Downloaded From ManualsPrinter.com Manuals 

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-67– Select one of the original direction key according to the orientation 
of positioned original, then touch [OK].
5Specify the binding direction of original.
–With [2%2] selected, the binding direction of original should be 
specified manually, otherwise the desired copy result may not be 
obtained.
– Touch [Binding Direction] to display the Binding Direction Screen.
– Touch the desired key, then touch [OK].
Downloaded From ManualsPrinter.com Manuals 

4Basic Copy Operations
4-68 bizhub 500/420/360 (Phase 3)
6Touch [OK].
The Basic Screen will be restored.
7Select additional copy conditions, as desired.
– For details on specifying the binding margin of double-sided 
original, see Specifying Position of Binding Margin (Margin) on 
page 5-18.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-69
4.9 Separate Scan Setting
A large amount of the original can be divided and scanned into memory.
The ADF accepts only 80 original sheets at a time, however, the Separate 
Scan setting allows you to handle the original that exceeds 80 sheets as a 
single job.
The multiple original scanned from the original glass, or both from the ADF 
and original glass, can also be combined into a single job.
To use Separate Scan mode
0Note that the maximum number...

4Basic Copy Operations
4-70 bizhub 500/420/360 (Phase 3)
2Touch [Separate Scan] on the Basic Screen.
3Select additional copy conditions, as desired.
4Press [Start] on the control panel.
The machine starts to scan the 
original.
The original image will be scanned into memory.
When completed, the message Scanning stopped./ Press [Start] to 
continue. will be displayed in the message area.
Downloaded From ManualsPrinter.com Manuals 

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-71
5Replace the original, then press [Start].
– Repeat steps 4 and 5 for all 
original pages to be scanned.
6When all the original pages are scanned, touch [Finish]
7Press [Start] on the control panel.
All the data in memory will be output.
Downloaded From ManualsPrinter.com Manuals 

4Basic Copy Operations
4-72 bizhub 500/420/360 (Phase 3)
!
Detail 
To delete the scanned image data, press [Stop]. For details, see To 
Stop/Resume/Delete a Job on page 4-78.
2
Note 
The memory indicator in the upper-right corner of the Basic Screen 
allows you to check the remainder of memory during the scanning job.
Downloaded From ManualsPrinter.com Manuals