Konica Minolta bizhub 420 User Manual

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-73
4.10 Setting Job During Warmup
Select copy conditions and start scanning during warmup, so that the 
machine may start printing immediately the machine engine is ready.
To scan the original during warmup
0The machine starts warming up under the following conditions:
The sub power switch is turned on. (See Turning on the machine on 
page 3-31.)
[Power Save] is pressed to release the Sleep mode. (See To interrupt the 
sleep mode to activate the...

4Basic Copy Operations
4-74 bizhub 500/420/360 (Phase 3)
5When scanning for more than one job, repeat the steps 2 to 4.
6Make settings and enter the print 
quantity, then press [Start].
Soon after the machine completes 
the warmup, printing job will start in 
the job order.
!
Detail 
For details on positioning the original, see Positioning the Original on 
page 4-9.
For details on setting the print quantity, see Setting Print Quantity on 
page 4-14.
The machine can be set to leave some settings made for...

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-75
4.11 Next Job Reservation
This function allows you to set up a new job and scan the original while a 
current job printing is in process. The reserved job will start printing 
immediately the current job operation is completed.
To reserve a copy job
0Up to 61 job settings including the current printing job can be made.
0The machine is initially set to accept the job reservation after the current 
job is finished with scanning the original and...

4Basic Copy Operations
4-76 bizhub 500/420/360 (Phase 3)– The Copy Operating Screen may appear when scanning for the 
original is completed and printing job starts.
In this case, touch [Program Next Job] on the screen to proceed.
2Position the original for the next job.
3Select copy conditions and enter the print quantity for the next job.
4Press [Start] on the control panel.
When the current printing job is 
completed, the reserved job will 
automatically start printing.
5To reserve more than one job,...

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-77
!
Detail 
For details on positioning the original, see Positioning the Original on 
page 4-9.
For details on setting the print quantity, see Setting Print Quantity on 
page 4-14.
The machine can be set to leave some settings made for the previous job 
in order to utilize them when scanning for the next job.
For details, see 9 Reset Setting > 3 Job Reset on page 16-93.
The standby jobs can be checked for the settings, rearranged with 
priority in...

4Basic Copy Operations
4-78 bizhub 500/420/360 (Phase 3)
4.12 To Stop/Resume/Delete a Job
This section describes how to stop, resume, or delete the job currently in 
process (scanning, printing, or both of scanning and printing).
To stop/resume the job in process
0This procedure is effective only for the current job in process.
0The reserved job which already started scanning cannot stop its 
operation. Touch [Job List] to delete the scanned data.
For details, see Job Management (Job List) on page 9-3....

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-79To delete a suspended job
0This procedure is effective only for suspended jobs.
0The scanned data of reserved job can be deleted by touching [Job List], 
to cancel printing.
For details, see Job Management (Job List) on page 9-3.
1Press [Stop] on the control panel 
during scanning/printing.
The scanning/printing will be 
suspended and the Job Stop Screen 
will be displayed.
2Touch and highlight the job to be deleted, then touch [Delete].
Selected...

4Basic Copy Operations
4-80 bizhub 500/420/360 (Phase 3)
4.13 Copy Conditions Incompatible with Basic Settings
Copy Conditions 
Incompatible 
with Basic 
SettingsBasic
DensityPaperZoom
AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom Basic
DensityAuto+,
Background 
Removal,
Density,
Paper
Auto Paper 
Select,,...

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-81
Basic
Zoom
Auto Zoom, ,,,,
e 1.0,, , ,,,
Preset Zoom,, ,, ,,
Zoom Ratio,, ,,, ,
Independent 
Zoom,,, ,,,,
Simplex/Duplex
single-sided 
originals
double-sid-
ed originals
single-sided 
copies
double-sid-
ed copies+++ +++ +
Separate Scan
Copy Conditions 
Incompatible 
with Basic 
SettingsBasic
DensityPaperZoom
AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled...

4Basic Copy Operations
4-82 bizhub 500/420/360 (Phase 3)
Copy Conditions 
Incompatible 
with Basic 
SettingsBasic
Separate Scan
Combine OriginalsQualityApplication
Simplex/
DuplexCom-
bine 
PagesOriginal
TextText/PhotoPhotoDot MatrixOHP InterleaveCover ModeInsert SheetInsert ImageChaptersNeg-/Pos. Reversesingle-sided originalsdouble-sided originalssingle-sided copiesdouble-sided copies2in14in18in1Mixed OriginalsOriginal Direction SettingsMargin Basic
DensityAuto
Background 
Removal
Density
Paper
Auto...