Konica Minolta bizhub 420 User Manual

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-13
4Close the ADF.
The original size will be detected automatically and displayed in the 
message area of the Basic Screen, while an appropriate paper size will 
be selected automatically by Auto Paper Select and displayed in the 
Paper area.
2
Reminder 
When Book Copy, Auto Original Size Detect mode of Image Repeat, 
Centering or Non-Image Area Erase is selected, the ADF should not be 
closed while all the originals are scanned.
In this case, be sure...

4Basic Copy Operations
4-14 bizhub 500/420/360 (Phase 3)
4.3 Setting Print Quantity
This section describes how to set or change print quantity.
To set print quantity
The machine is set to copy one grouped set as factory default.
With two or more of print quantity specified, the Sort mode will be 
automatically selected. 
0Print quantity can be entered in any instance of the procedure unless the 
control panel keypad is temporarily used for entering other values.
1Enter the desired print quantity from...

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-15To change print quantity
Follow the procedure below to change the print quantity that has been 
already entered.
1Press [C] (Clear) on the control panel.
The quantity displayed on the touch panel will return to 1.
2Enter the correct quantity from the control panel keypad.
Newly entered quantity will be displayed on the touch panel.
Downloaded From ManualsPrinter.com Manuals 

4Basic Copy Operations
4-16 bizhub 500/420/360 (Phase 3)
4.4 Density Setting
The machine is initially set to detect the density of the original image and 
automatically select an appropriate exposure for the copy.
Adjust the exposure level manually in order to make a copy darker or lighter 
than the print result of Auto Density.
The following two types of density adjustments are provided.
Density: Select the exposure level of print image from nine levels.
Background Removal: Select the exposure level of...

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-17
2Select the desired exposure level.
– Nine levels are provided to adjust the density of print image.
Touching [Light]/[Dark] once makes it lighter/darker by one level.
– Touch [Std.] to specify the middle of the nine levels.
– Touch [Auto] to set the machine to automatically detect the original 
density level and select the optimum exposure for printing.
3Select the desired background density level.
– Nine levels are provided to adjust the density...

4Basic Copy Operations
4-18 bizhub 500/420/360 (Phase 3)
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-19
4.5 Paper Size Setting
The following two modes are provided to select the paper size.
Select either mode to cope with the desired copying operation.
-Automatically select the paper size according to the original size.
-Manually select the desired paper size.
To select paper size automatically (Auto Paper Select)
This mode detects the original size placed in the ADF or on the original glass 
and makes a copy of an appropriate paper size selected...

4Basic Copy Operations
4-20 bizhub 500/420/360 (Phase 3)
2Touch [Auto Paper Select].
3Touch [OK].
The Basic Screen will be restored with Auto Paper Select displayed on 
the Paper key.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-21To select paper size manually
Making a copy with the desired paper size and magnification ratio specified, 
copied image may be too large to fit in, or too small compared with the 
selected paper size.
In this case, Auto Zoom can be used to automatically select an appropriate 
magnification ratio according to the original size and specified paper size. 
For details, see To select a magnification ratio automatically (Auto Zoom) 
on page 4-54.
1Touch...

4Basic Copy Operations
4-22 bizhub 500/420/360 (Phase 3)
3Touch [OK].
The Basic Screen will be restored with the selected paper size and 
orientation displayed on the Paper key.
!
Detail 
For details of the paper type icon, see Special Paper on page 10-12.
!
Detail 
The machine is initially set to enable Auto Zoom immediately after the 
original is loaded in the ADF.
However, positioning the original on the original glass does not 
automatically activate Auto Zoom as factory default. An administrator...