Konica Minolta bizhub 420 User Manual

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-3
4 Basic Copy Operations
4.1 General Copy Operation
This section describes how to make a basic copy.
How to make a basic copy
0The following procedure is basic and not always applicable to the 
operation of selected copy conditions. When using a specific function, be 
sure to follow the procedure described in each section.
1Press [Copy] on the control panel to display the Basic Screen in Copy 
mode.
– The following type of Basic Screen will be...

4Basic Copy Operations
4-4 bizhub 500/420/360 (Phase 3)
2Position the original.
Downloaded From ManualsPrinter.com Manuals 

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-5– For details on positioning the original, see Positioning the Original 
on page 4-9.
– The machine will detect the original size automatically when the 
original is loaded in the ADF or positioned on the original glass with 
ADF closed, then select an appropriate paper size automatically by 
Auto Paper Select function.
The illustration in the left side area of the screen will vary depending on 
where the original is positioned.
3Enter the desired...

4Basic Copy Operations
4-6 bizhub 500/420/360 (Phase 3)
4Make copy settings as desired.
– The following settings are initially specified as factory default.
Density: Auto (Density), Standard (Background)
Paper: Auto Paper Select
Zoom: Full size (e1.000)
Simplex/Duplex: 1>1
Original Image Type: Text/Photo
– For details of each setting, refer to the following pages.
Density: Density Setting on page 4-16
Paper: Paper Size Setting on page 4-19
Zoom: Zoom Setting on page 4-36
Simplex/Duplex: Simplex/Duplex...

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-7
5Press [Start] on the control panel.
– When the machine starts 
scanning the original, the basic 
job settings and current original 
count will be displayed on the 
touch panel.
When printing job is started, the Basic Screen will be restored with 
the message Ready to accept another job displayed in the 
message area.
Downloaded From ManualsPrinter.com Manuals 

4Basic Copy Operations
4-8 bizhub 500/420/360 (Phase 3)
!
Detail 
The machine can be set to display the Copy Operating Screen instead of 
the Basic Screen in order to provide the information about set quantity 
and number of output pages during the print operation.
This setting can be specified in User Setting selected from the 
Utility/Counter Screen. See 5 Copy Screen on page 15-28 for details.
When print operation of the current job is started, scanning for the next 
job becomes available.
For...

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-9
4.2 Positioning the Original
This machine is provided with two devices for scanning the original; ADF and 
original glass. Select the optimum one according to the original type.
To position originals into the ADF
0For details of the original available in the ADF, see Originals on 
page 10-15.
0The machine will automatically detect the original size positioned in the 
ADF, then select an appropriate paper size by Auto Paper Select 
function.
0Never...

4Basic Copy Operations
4-10 bizhub 500/420/360 (Phase 3)
1Arrange the original in order.
2Position the original FACE UP (with 
page one UP) in the ADF.
3Adjust paper guides.
The original size will be detected 
automatically and displayed in the 
message area of the Basic Screen, 
while an appropriate paper size will 
be selected automatically by Auto 
Paper Select and displayed in the 
Paper area.
!
Detail 
Mixed size originals can be copied together from the ADF.
For details, see Copying Mixed Size...

Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-11To position the original on original glass
0For details of the original types available on the original glass, see 
Originals on page 10-15.
0The machine will automatically detect the original size positioned on the 
original glass, then select an appropriate paper size by Auto Paper Select 
function.
0Be sure to position the original in the specified orientation.
For details, see Specifying Orientation of Original (Original Direction) on 
page...

4Basic Copy Operations
4-12 bizhub 500/420/360 (Phase 3)
3Align the original with the mark in the 
rear left corner of measuring guide.
– For bound original spread over 
two facing pages such as a book 
or magazine, position the top of 
the original toward the rear side 
of the original glass, aligning it 
with the arrow in the rear left 
corner of measuring guide.
– For transparent or translucent 
original, layer a blank sheet of the 
same size as the original over the 
placed original.
Downloaded From...