Konica Minolta bizhub 420 User Manual

Application Functions6
bizhub 500/420/360 (Phase 3) 6-69
6.10 Making Multiple Page Signature Booklet (Booklet)
Use this function to arrange the scanned original pages in booklet format in 
correct order when folded in half.
If the machine is equipped with Finisher FS-510 and Saddle stitcher SD-502 
options, the finished sets can be half-folded and also stapled in the center.
Function overview
With Booklet function specified, magnification will be set to e0.707 
automatically. For example, the A4 original...

6Application Functions
6-70 bizhub 500/420/360 (Phase 3)To copy using Booklet
0Load the original in the ADF. If the number of original sheets exceeds 80, 
use Separate Scan mode. For details, see Separate Scan Setting on 
page 4-69.
0Original pages should be a multiple of 4 in 1%2 mode, or a multiple of 2 
in 2%2 mode. Otherwise, blank pages are automatically inserted to the 
last.
0The original size is detected when loaded in the ADF, then the machine 
automatically specifies the recommended...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-71
4Touch [Booklet] on the Application Screen.
The Booklet Screen will be displayed.
5Specify the binding position of the booklet.
– Touch [Left Bind] or [Right Bind] to highlight it.
– Use [Edit Margin] and [Page Interval] to adjust the position of image 
printed on a page spread, if necessary.
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-72 bizhub 500/420/360 (Phase 3)– Use the Page Interval function to make the specified amount of 
blank space in the center, between the two images on a page. Use 
[-], [+], or control panel keypad to enter the desired amount, then 
touch [OK].
– U s e  t h e  E d i t  M a r g i n  f u n c t i o n  t o  adjust the image position widthwise 
and lengthwise as desired, while Page Interval simply makes a 
blank space between the images. For details of the Edit Margin 
function, see...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-73
7Select additional copy conditions, as desired.
– To make a folded booklet of the same size as the original size, 
manually select the paper size twice the original size. In this case, 
the recommended magnification ratio of e0.707 will be changed to 
e1.000 automatically.
– Simplex/Duplex setting is automatically specified as 1%2. If the 
double-sided original is loaded in the ADF, touch [Simplex/Duplex] 
to select 2%2 mode on the Simplex/Duplex...

6Application Functions
6-74 bizhub 500/420/360 (Phase 3)
6.11 Reversing Color and Gradation of Image (Neg-Pos. 
Reverse)
Use this function to reverse the image from black-on-white to white-on-
black, and vice versa.
Function overview
To copy using Neg-/Pos. Reverse
1Position the original.
2Enter the desired print quantity from the control panel keypad.
3Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 

Application Functions6
bizhub 500/420/360 (Phase 3) 6-75
4Touch [Neg./Pos. Reverse] on the Application Screen to highlight it.
5Select additional copy conditions, as desired.
6Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready 
for output.
2
Note 
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function, 
press...

6Application Functions
6-76 bizhub 500/420/360 (Phase 3)
6.12 Creating Margin of Copy Image (Page Margin)
Use this function to create a binding margin on copies in order to make it 
easier for filing purposes.
Selecting the binding position of double-sided copies, the image orientation 
of the back side of copies can be changed.
Also, use this function to adjust the position of copy image on both front and 
back sides when making double-sided copies, in order to correct the image 
dislocation.
Function...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-77Creating Binding Margin/ Selecting Binding Position
This function creates a binding margin on copies in order to make it easier 
for filing purposes.
With the margin set to None, the desired binding position of the double-
sided copy can be specified for the purpose of changing the image 
orientation.
To copy using Page Margin
0The factory default is Auto for the binding position, None for the margin.
0Available range for the margin is 0.1 mm ~ 20.0...

6Application Functions
6-78 bizhub 500/420/360 (Phase 3)
4Touch [Page Margin] on the Application Screen.
The Page Margin Screen will be displayed.
5Select the binding position.
– Touch the desired binding position key to highlight it.
Downloaded From ManualsPrinter.com Manuals