Konica Minolta bizhub 420 User Manual

Application Functions6
bizhub 500/420/360 (Phase 3) 6-59
4Specify the paper tray on the Paper Screen.
– Touch [Paper] on the Basic Screen to display the Paper Screen.
– Touch the desired tray key to highlight it. Without this tray selection, 
the machine will automatically use copy paper loaded in tray 1 to 
print.
5Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-60 bizhub 500/420/360 (Phase 3)
6Touch [Book Copy/Repeat], then touch [Image Repeat].
The Image Repeat Screen will be displayed.
7Specify the desired Scan Range mode.
– If the original size can hardly be detected from the ADF, use Set 
Range mode to specify the scanning area manually.
Downloaded From ManualsPrinter.com Manuals 

Application Functions6
bizhub 500/420/360 (Phase 3) 6-61– To specify the scanning area of the original placed on the original 
glass, touch [Set Range] to display the Standard Size Screen, then 
select the desired scanning area.
Use up/down arrow key to scroll to the desired size, if necessary.
– To enter the dimensions of scanning area, touch [Custom Size] on 
the Standard Size Screen to display the Custom Size Screen, then 
enter the desired dimensions from the control panel keypad. In 
order to...

6Application Functions
6-62 bizhub 500/420/360 (Phase 3)
8Touch [2/4/8 Repeat] on the Image Repeat Screen.
The 2/4/8 Repeat Screen will be displayed.
9Specify the number of repeats.
– Touch [2 Repeat], [4 Repeat], or [8 Repeat] to highlight it.
– Select [2 Repeat] to repeat the original image twice on a printed 
page.
To adjust the interval between two images, touch [Repeat Interval 
Setting]. Proceed to the next step.
– Select [4 Repeat] to repeat the original image four times on a 
printed page....

Application Functions6
bizhub 500/420/360 (Phase 3) 6-63
10Specify the interval between repeated images.
– Touch [Repeat Interval Setting] to display the Repeat Interval 
Setting Screen.
– Use [+] and [–] to enter a fraction in 0.1 mm increments.
Touch the bidirectional arrow key to move the cursor, then use [+], 
[–], or control panel keypad to enter whole number part of the 
desired value.
– If the interval does not need to be specified, touch [No Shift].
?What is the actual function of Repeat Interval...

6Application Functions
6-64 bizhub 500/420/360 (Phase 3)
2
Note 
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function, 
press [Reset] on the control panel.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the 
Application Screen or Basic Screen.
Downloaded From...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-65
6.9 Dividing Spread Image into Right and Left Pages 
using ADF (Booklet Pagination)
Use this function to divide a page spread image scanned from the ADF into 
two separate images of right and left pages. 
Function overview
To use this function properly, the binding position of the spread original 
should be specified.
ModeDescription
Left Bind Copies will be made from the left page to the right page.
Right Bind Copies will be made from the right...

6Application Functions
6-66 bizhub 500/420/360 (Phase 3)To copy using Booklet Pagination
0Load the original in the ADF. If the number of original sheets exceeds 80, 
use Separate Scan mode. For details, see Separate Scan Setting on 
page 4-69.
0This function is available for the landscape type original only. Portrait type 
original cannot be used.
The original size will be detected automatically when loaded in the ADF.
0Original Direction and Margin settings are ineffective, even if specified.
0Available...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-67
5Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
6Touch [Book Copy/Repeat], then touch [Booklet Pagination].
The Booklet Pagination Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-68 bizhub 500/420/360 (Phase 3)
7Select the binding position of the spread original.
– For the spread original to read from the left page to the right page, 
touch [Left Bind] to highlight it.
On the contrary, if the spread original reads from the right page to 
the left page, touch [Right Bind].
8Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Booklet Pagination Screen to cancel the 
setting change.
9Select additional copy conditions, as desired.
10Press...