Konica Minolta bizhub 420 User Manual

Application Functions6
bizhub 500/420/360 (Phase 3) 6-39
7Select the desired copy settings, and then press [Start] on the control 
panel.
– To print a single copy to be checked, touch [Proof Copy].
– Repeat steps 6 and 7 until all original batches have been scanned. 
The amount of memory available can be checked beside Memory 
in the upper-right corner of the screen. In addition, the number of 
original batches can be checked beside Number of Sep. Scans.
– If not enough space is available in the memory,...

6Application Functions
6-40 bizhub 500/420/360 (Phase 3)
9Select [Yes], and then touch [OK].
– To change the copy settings, select [No], and then touch [Change 
Setting].
10Specify any other desired copy settings.
– Touch [Print], and then specify the printing method for the entire 
scanned original.
Downloaded From ManualsPrinter.com Manuals 

Application Functions6
bizhub 500/420/360 (Phase 3) 6-41
?Is there more information about the settings?
%Refer to the appropriate section.
11Using the keypad, type in the desired number of copies.
12Touch [Execute] or press [Start] on the control panel.
– If [Cancel] is touched, a message appears, requesting confirmation 
to delete the data. To stop printing, select [Yes], and then touch 
[OK].
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-42 bizhub 500/420/360 (Phase 3)
6.7 Dividing Spread Image into Right and Left Pages 
(Book Copy)
Use this function to divide a page spread image scanned from the original 
glass, such as an open book or catalog, into two separate images of right 
and left pages. If front and back covers are desired, scan the cover pages 
first so that they will be printed without image division performed and all the 
original pages will be output in correct order.
The page spread original can...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-43
Front and  Back  Cover Printed sets will be output from the front cover page, divided document 
pages according to pagination, then the back cover page.
The original should be scanned from the front cover, back cover, then 
page spread originals in page order.
Mode keyDescription
Downloaded From ManualsPrinter.com Manuals 

6Application Functions
6-44 bizhub 500/420/360 (Phase 3)To copy using Book Copy
0Scan the original from original glass with the ADF kept open. The ADF 
cannot be used to scan the original.
0Non-Image Area Erase will be specified automatically.
0Original Direction and Margin settings are unavailable.
0With Book Copy specified, tray 1 will be automatically selected as copy 
paper tray source.
Change the tray selection manually, if desired. In this case, the scanning 
area will be automatically determined...

Application Functions6
bizhub 500/420/360 (Phase 3) 6-45
2Enter the desired print quantity from the control panel keypad.
3Load the desired copy paper into any tray.
4Specify the paper tray on the Paper Screen.
– Touch [Paper] on the Basic Screen to display the Paper Screen.
– Touch the desired tray key to highlight it. Without this tray selection, 
the machine will automatically use copy paper loaded in tray 1 to 
print.
5Touch [Application] tab on the Basic Screen.
The Application Screen will be...

6Application Functions
6-46 bizhub 500/420/360 (Phase 3)
6Touch [Book Copy/Repeat].
The Book Copy/Repeat Screen will be displayed.
7Touch [Book Copy].
The Book Copy Screen will be displayed.
8Select the desired Book Copy mode.
– Touch either [Book Spread], [Separation], [Front Cover], or [Front 
and Back Cover] to highlight it.
Downloaded From ManualsPrinter.com Manuals 

Application Functions6
bizhub 500/420/360 (Phase 3) 6-47– When selecting Separation, Front Cover, or Front and Back Cover 
mode, also select the binding position of the original by touching 
[Left Bind] or [Right Bind] in the Position area.
– If necessary, touch [Erase] or [Center Erase] in the Book Erase area 
to display the Erase Screen or Center Erase Screen to use each 
function.
For details of setting procedure, see Erasing Black Marks along 
Borders (Erase) on page 6-86 and Erasing Black Marks...

6Application Functions
6-48 bizhub 500/420/360 (Phase 3)
9Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Book Copy Screen, Erase Screen, or Center 
Erase Screen to cancel the setting change.
10Select additional copy conditions, as desired.
– When Separation is selected and separated original size is different 
from selected paper size, specify the desired magnification.
– To use Centering function in combination, touch [Image 
Adjustment] on the Application Screen, then touch...