Konica Minolta bizhub 362 User Manual

4Additional copy operations
4-2 362/282/222
Additional copy operations
Chapter 4
4 Additional copy operations
4.1 Checking the copy settings (Mode Check)
From the Check Job Details screens, the current copy settings can be 
checked and changed if desired.
To check the settings
1Press the [Mode Check] 
key.
Mode Check
Downloaded From ManualsPrinter.com Manuals 

Additional copy operations4
362/282/222 4-3
Additional copy operations
Chapter 4
The Check Job Details 
screen appears.
Downloaded From ManualsPrinter.com Manuals 

4Additional copy operations
4-4 362/282/222
Additional copy operations
Chapter 4
2After checking the settings, touch [Exit] or press the [Mode Check] key 
again.
The Basics screen appears again.
!
Detail 
There are four Check Job Details screens. The number of the currently 
displayed screen appears to the right of the screen title.
To display the previous screen, touch [Back]. To display the next screen, 
touch [Fwd].
If the setting for a function has been changed from the default, the button 
for that...

Additional copy operations4
362/282/222 4-5
Additional copy operations
Chapter 4
4.2 Printing a sample to check the settings (Proof Copy)
Before printing a large number of copies, a single proof copy can be printed 
to be checked. This prevents copy errors from occurring.
To make test prints
1Position the document to be copied. (Refer to page 3-8 for details.)
– The “Proof Copy” function can be used only if the machine has 
been set for 2 or more copies.
2Select the desired copy settings.
3Press the...

4Additional copy operations
4-6 362/282/222
Additional copy operations
Chapter 4
6In the Proof copy screen, 
change the copy set-
tings as desired.
– The Finishing set-
tings appear in the 
Proof copy screen 
only if they have 
been specified for 
the job being 
proofed. If the copy 
settings cannot be 
changed, stop print-
ing the proof copy. Next, press the [Reset] key to cancel the copy 
settings, and then specify the desired settings.
7Press the [Proof Copy] 
key to print another 
proof copy.
– If...

Additional copy operations4
362/282/222 4-7
Additional copy operations
Chapter 4
4.3 Interrupting a copy job (Interrupt mode)
The current jobs can be temporarily interrupted so a document can be cop-
ied with different copy settings.
To interrupt a copy job
1Position the document to be copied. (Refer to page 3-8 for details.)
2Press the [Interrupt] key.
– If a job is being print-
ed, the message 
“Job is stopping.” 
appears.
The indicator on the [In-
terrupt] key lights up in 
green and printing of the...

4Additional copy operations
4-8 362/282/222
Additional copy operations
Chapter 4
4.4 Registering copy programs (Mode Memory)
Up to 10 copy programs can be registered.
The registered copy programs can be recalled and used for copying.
To register a copy program
1Using the touch panel and control panel keys, specify the copy settings 
to be registered in the copy program.
?Can the current settings be checked?
%To check the currently specified copy settings, press the [Mode 
Check] key.
2Press the [Mode...

Additional copy operations4
362/282/222 4-9
Additional copy operations
Chapter 4
4Touch the button for the program number where a program is to be 
registered.
– If a program has not yet been registered with the program number 
button that is pressed, the empty icon disappears from the number 
button to indicate that a program is registered with it.
– If a program has al-
ready been regis-
tered with the 
program number 
button that is 
pressed, a message 
appears, requesting 
confirmation to over-
write...

4Additional copy operations
4-10 362/282/222
Additional copy operations
Chapter 4
To recall a copy program
The registered copy programs can be recalled and used for copying.
1Position the document to be copied. (Refer to page 3-8 for details.)
2Press the [Mode Memo-
ry] key.
The Program screen ap-
pears.
3Touch [Recall].
– To stop recalling a 
copy program, press 
the [Reset] key or the 
[Mode Memory] key.
?Can the specified 
settings for a copy 
program be 
checked?
%To check the pro-
gram copy settings...

Additional copy operations4
362/282/222 4-11
Additional copy operations
Chapter 4
To checking the copy settings
The copy settings to be registered as a copy program can be checked.
1Press the [Mode Memo-
ry] key.
The Program screen ap-
pears.
2Touch [Check].
3Touch the program 
number button regis-
tered with the copy set-
tings to be checked. 
The Check Program 
screen appears.
Mode Memory
Downloaded From ManualsPrinter.com Manuals